Solenoid and Relief Valve (Steering) - Assemble
组装步骤
- 安装孔 (15) 。 安装单向阀 (16) 。
Show/hide table
图 1 | g01642231 |
- 安装接头 (18) 。 安装螺纹接头 (17) 和盖 (13) 。
- 安装三通管组件 (14) 。
- 安装阀 (11) 的 O 形密封圈和环。 安装阀 (11) 。 将阀 (11) 拧紧至扭矩为 25 ± 5 N·m (18 ± 4 lb ft)。
Show/hide table
图 2 | g01642220 |
- 安装线圈 (8) 和垫圈 (10) 。 安装螺母 (12) 。 拧紧螺母 (12) 至扭矩为 9.5 ± 1.5 N·m (84 ± 13 lb in)。
- 安装 O 形密封圈 (3) 和 (5) 。 安装环 (4) 。 安装单向阀 (6) 。
- 安装阀 (7) 的 O 形密封圈和环。 安装阀 (7) 。 将阀 (7) 拧紧至扭矩为 70 ± 5 N·m (52 ± 4 lb ft)。
- 安装螺母 (9) 。 拧紧螺母 (9) 至扭矩为 12 ± 1.5 N·m (106 ± 13 lb in)。
- 安装取样阀 (1) ,然后安装盖 (2) 。
End By: 安装电磁阀和安全阀(转向)。
Caterpillar Information System:
797F and 797F XQ Off-Highway Trucks Machine Systems Solenoid and Relief Valve (Steering) - Disassemble
797F and 797F XQ Off-Highway Trucks Machine Systems Solenoid and Relief Valve (Steering) - Remove and Install
C7.1 Industrial Engine Plate Locations and Film Locations - Engine Aftertreatment System
C9.3 Tier 4 Final Engines Valve Mechanism Cover
CEM Locomotive Aftertreatment Fluid Recommendations
349F and 352F Excavators Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
C13 Industrial Engines Exhaust Diffuser Adapter
C18 Marine Engine Zinc Rods - Inspect/Replace
C9.3 Engines for Caterpillar Built Machines Exhaust Sensor Lines - Remove and Install
C13 Industrial Engines Exhaust Diffuser Adapter
C13, C15, and C18 Tier 4 Final Engines Exhaust Gas Valve (NRS)
C27 and C32 Tier 4 Engines Ether Starting Aid - Test
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Control Valve - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Control Valve - Disassemble
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Control Valve - Assemble
C9.3 Tier 4 Final Engines Fuel Filter Base - Primary
2010/05/24 A Redesigned Water Lines Group Is Now Used on Certain 3516B Locomotive Engines {1380}
C27 and C32 Engines for Caterpillar Built Machines ECM - Replace
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
C4.4 Industrial Engine Electrical System
C27 and C32 Tier 4 Engines Mounting Frame
C4.4 Industrial Engine Exhaust Cooler (NRS)
C13, C15, and C18 Tier 4 Final Engines Air Lines
325D and 329D Excavators Joystick Controls Alternate Patterns