Exhaust Diffuser Adapter
Show/hide table
Illustration 1 | g02151444 |
(1) Diffuser
(2) Tighten clamp to ...
(3) Turbine housing
Caterpillar Information System:
C18 Marine Engine Zinc Rods - Inspect/Replace
C9.3 Engines for Caterpillar Built Machines Exhaust Sensor Lines - Remove and Install
C13 Industrial Engines Exhaust Diffuser Adapter
C13, C15, and C18 Tier 4 Final Engines Exhaust Gas Valve (NRS)
C27 and C32 Tier 4 Engines Ether Starting Aid - Test
120M, 12M, 140M and 160M Motor Graders Transmission Lubrication Oil Pressure - Test
C4.4 Industrial Engine Air Inlet and Exhaust System - Single Turbocharger
C6.6 Industrial Engine Air Compressor - Remove and Install - Single Cylinder
C6.6 Industrial Engine Air Compressor - Remove and Install - Twin Cylinder Compressor
C6.6 Industrial Engine Alternator - Install
C4.4 Industrial Engine V-Belt - Test
C6.6 Industrial Engine Electric Starting Motor - Remove and Install
349F and 352F Excavators Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
CEM Locomotive Aftertreatment Fluid Recommendations
C9.3 Tier 4 Final Engines Valve Mechanism Cover
C7.1 Industrial Engine Plate Locations and Film Locations - Engine Aftertreatment System
797F and 797F XQ Off-Highway Trucks Machine Systems Solenoid and Relief Valve (Steering) - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Solenoid and Relief Valve (Steering) - Disassemble
797F and 797F XQ Off-Highway Trucks Machine Systems Solenoid and Relief Valve (Steering) - Assemble
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Control Valve - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Control Valve - Disassemble
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Control Valve - Assemble
C9.3 Tier 4 Final Engines Fuel Filter Base - Primary
2010/05/24 A Redesigned Water Lines Group Is Now Used on Certain 3516B Locomotive Engines {1380}