Plate Locations and Film Locations - Engine Aftertreatment System
Show/hide table
| |
| Illustration 1 | g02151573 |
|
Typical example | |
The module arrangement exhaust plate is installed on the mounting plate (1). The location of the arrangement plate mounting plate can alter depending on the application.
Show/hide table
| |
| Illustration 2 | g02109493 |
|
Module Arrangement Exhaust Plate | |
Record the information that is on the plate. This information identifies the engine aftertreatment system. This information will be required by your Caterpillar dealer.
Caterpillar Information System:
C9.3 Tier 4 Final Engines Valve Mechanism Cover
CEM Locomotive Aftertreatment Fluid Recommendations
349F and 352F Excavators Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
C13 Industrial Engines Exhaust Diffuser Adapter
C18 Marine Engine Zinc Rods - Inspect/Replace
C9.3 Engines for Caterpillar Built Machines Exhaust Sensor Lines - Remove and Install
C13 Industrial Engines Exhaust Diffuser Adapter
C13, C15, and C18 Tier 4 Final Engines Exhaust Gas Valve (NRS)
C27 and C32 Tier 4 Engines Ether Starting Aid - Test
120M, 12M, 140M and 160M Motor Graders Transmission Lubrication Oil Pressure - Test
C4.4 Industrial Engine Air Inlet and Exhaust System - Single Turbocharger
C6.6 Industrial Engine Air Compressor - Remove and Install - Single Cylinder
797F and 797F XQ Off-Highway Trucks Machine Systems Solenoid and Relief Valve (Steering) - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Solenoid and Relief Valve (Steering) - Disassemble
797F and 797F XQ Off-Highway Trucks Machine Systems Solenoid and Relief Valve (Steering) - Assemble
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Control Valve - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Control Valve - Disassemble
797F and 797F XQ Off-Highway Trucks Machine Systems Steering Control Valve - Assemble
C9.3 Tier 4 Final Engines Fuel Filter Base - Primary
2010/05/24 A Redesigned Water Lines Group Is Now Used on Certain 3516B Locomotive Engines {1380}
C27 and C32 Engines for Caterpillar Built Machines ECM - Replace
C15 and C18 Engines for Caterpillar Built Machines Exhaust Manifold
C4.4 Industrial Engine Electrical System
C27 and C32 Tier 4 Engines Mounting Frame