1989/09/11 Caterpillar


Plasma Top Piston Rings Replace Chrome Rings{1215,1214}

Usage:


3400 Family Of Engines

Reference: Service Magazine; June 13, 1988; Page 10; "Piston Application Guide."

Reference: 3400 Engine Major Component Performance Guide; SEBD0794.

Chrome top piston rings are no longer used on 3400 Engines. The chrome top piston ring has been replaced with a plasma top piston ring. The plasma top rings are more scuff resistant than the chrome top rings. However, since the plasma coating is more abrasive than cast iron, liner wear at the top ring turn-around point may increase when plasma top rings are used.

Low speed (1800 rpm or slower) marine engines changed to plasma top rings effective with 3412 Marine Engine 60M3696 and 3408 Marine Engine 99U6169. Chrome top rings have not been used in low horsepower truck engines effective with 3406B Truck Engine 7FB87310.

The chrome top rings have also been removed from service ring kits. However, the 2W1521 Chrome Top Ring is still available for Parts Service, if desired, for rebuild where liner reusability is a major concern.

Caterpillar Information System:

1989/09/11 Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/08/28 New Fuel Injectors Available For Parts Service{1290}
1989/08/28 Recommendations For Lubrication Oils In Powershift Transmissions{0645,3150,3179}
1989/08/21 New Engine Oil Cooler Core Groups With Rubber End Sheets Used{1378}
1989/08/21 Lube System Screen Assembly Available For Use During Dynamometer Testing{1307}
1989/08/21 Additional Clamp Added To Aftercooler Water Line{1380}
1989/08/21 Use New Operation And Maintenance Manuals{0374,0375,1000}
1989/08/21 Connecting Rod Bearing Maintenance{0372,1203,1219}
1989/08/21 New Connecting Rod Bearing Used{0372,1203,1219}
1989/08/21 Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/14 New Watercooled Exhaust Manifolds{1059}
1989/08/14 New Oil Change Recommendations For Severe Applications{0374,1302}
1989/09/18 Radio Interference With Electronic Control Systems{7338}
1989/09/18 Tightening Procedure For Turbocharger Compressor Nut{1052,1060}
1989/09/18 New Design Alternator Belt Used{1405,1406}
1989/09/18 New Collar Used In Fuel Injection Control Groups{1298}
1989/09/18 Procedure To Wash Turbochargers On Engines Powered By Residual Fuel{1052}
1989/09/18 Spindle In Centrifugal Lube Filter Group Now Serviced As Part Of Body Assembly{1318,1306}
1989/09/18 New Seal Group Used In Water Pump Group{1361}
1989/09/25 New Gasket Used On Oil Regulator Housing{1393,1330}
1989/09/25 Improved Support Assembly Used In Water Lines Group{1380}
1989/09/25 Improved Turbocharger Outlet Gasket{1052,1061}
1989/09/25 Setting the Governor Load Stop Output Dimension For More Than 9.00 mm{0782,1257,1265}
1989/09/25 Gauge Your Technical Knowledge-New Feature Covers Variety of Service Topics{0315,0110,0111,0113,5050}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.