Front Suspension (Cylinder) - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 196-6960     | 挡圈工具     | 1     |
B     | 138-7574     | 连杆支架     | 1     |
C     | 160-5493     | 拉拔器     | 1     |
开始:
- 拆下行车制动器。
- 确保悬架油缸中的氮气已排出。 请参阅专门说明书, SEHS9411, "维修非公路卡车的悬架油缸"。
Show/hide table
为了避免可能造成的人身伤害,在拆解前悬架油缸前卸掉充氮压力。 |
Show/hide table
高压油缸 在释放压力之前,不可拆卸任何零部件,否则会造成人身伤害。 |
- 按圆周次序拧松每根螺栓 (1) 半圈。
注: 未进行此步骤可能导致螺栓断裂。
Show/hide table
图 1 | g02139697 |
- 拆下十个螺栓 (1) 。 不要拆下指示的两个螺栓 (1) 。
Show/hide table
图 2 | g02139718 |
- 将工具 (A) 安装到固定板 (2) 上。 固定板 (2) 的重量约为 170 kg (375 lb)。 拆下其余螺栓 (1) 。 拆下挡板 (2) 。
Show/hide table
图 3 | g02139721 |
- 卸下垫片 (3) 。
注: 记录垫片 (3) 的数量和顺序,以便安装。
Show/hide table
图 4 | g02139723 |
- 将工具 (B) 和适当的起吊设备连接到车桥 (4) 上。 车桥 (4) 的重量约为 1675 kg (3693 lb)。
Show/hide table
图 5 | g02139725 |
- 使用工具 (A) ,以便将工具 (C) 定位到车桥 (4) 上。 工具 (C) 的重量约为 110 kg (243 lb)。
Show/hide table
图 6 | g02139849 |
- 安装三根螺栓 (1) 。 拆下工具 (A) 。
- 等距安装其余的螺栓 (1) 。 均匀的拧紧螺栓 (1) 直至工具 (C) 接触到悬架油缸连杆 (5) 。
Show/hide table
图 7 | g02139851 |
- 按圆周次序继续拧紧螺栓 (1) 半圈,直至心轴 (4) 从悬架油缸连杆 (5) 上分离。
- 使用工具 (A) 以便拆下工具 ( C) 。
- 安装其余的垫块,以便支撑悬架油缸组件 (6) 的重量。 悬架油缸 (6) 的重量约为 3450 kg (7600 lb)。
Show/hide table
图 8 | g02140367 |
- 拆下螺栓 (7) 。 将车桥 (4) 从悬架油缸组件 (6) 上拆下。
Show/hide table
图 9 | g02139852 |
Caterpillar Information System:
C4.4 Industrial Engine Emissions Certification Film
C18 Marine Engine Engine Oil Level - Check
797F and 797F XQ Off-Highway Trucks Machine Systems Accumulator (Steering) - Remove and Install
349F and 352F Excavators Hydraulic System Travel on Level Ground - Test - Optional Test
797F and 797F XQ Off-Highway Trucks Machine Systems Air Dryer - Remove and Install
C4.4 Industrial Engine Plate Locations and Film Locations
C6.6 Industrial Engine Fuel Injection
2010/11/22 New Connecting Rod for the C6.6 Engine {1225}
C4.4 Industrial Engine Engine Description
797F and 797F XQ Off-Highway Trucks Machine Systems Metering Pump (HMU) - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Cab - Remove and Install
C15 and C18 Industrial Engines Diesel Particulate Filter
797 Off-Highway Truck Front Suspension (Cylinder) - Install
797 Off-Highway Truck Wheel, Brake and Suspension (Front) - Remove
797 Off-Highway Truck Wheel, Brake and Suspension (Front) - Install
XQ400 Power Module Burn Prevention
3176C and 3196 Marine Engines Engine Starting
C15 and C18 Engines Fuel and the Effect from Cold Weather
Procedure to Repair the Pump for the Aftertreatment Regeneration Device (ARD) {1258} Procedure to Repair the Pump for the Aftertreatment Regeneration Device (ARD) {1258}
C27 and C32 Engines for Caterpillar Built Machines Lubrication System
C18 Marine Engine Sensors and Electrical Components
C15 and C18 Engines Electrical System
C6.6 Industrial Engine Basic Engine
C6.6 Industrial Engine Air Inlet and Exhaust System