C27 Industrial Engine and C27 Locomotive Engine Caterpillar


Configuration Parameters

Usage:

C27 JFJ
K zaznamenání naprogramovaných specifikací použijte následující formuláře.

Zákaznická hesla

  • První heslo ____________________

  • Druhé heslo ____________________

Jmenovité hodnoty výkonu (k při ot/min) ____________________

Výběr jmenovitého výkonu (A-E) ____________________

Poměr vzduchu a paliva

  • Úroveň 1: Minimum kouře ____________________

  • Úroveň 2: Optimální výkon ____________________

  • Úroveň 3: Maximální zrychlení ____________________

Parametry regulátoru vývodového hřídele

  • Rychlost změny otáček vývodového hřídele ____________________ ot/min/s

Parametry motoru

  • Horní mezní otáčky motoru (TEL) při 100procentní zátěži (v případě potřeby) ____________________

  • Vysoké volnoběžné otáčky (v případě potřeby) ____________________

  • Nízké volnoběžné otáčky ____________________

Režim monitorování motoru

  • "VYPNUTO" ____________________

  • "Výstraha" ____________________

  • "Výstraha/snížení výkonu" ____________________

  • "Výstraha/snížení výkonu/vypnutí motoru" ____________________

  • "Aktivace/deaktivace snímače hladiny chladicí kapaliny" ____________________

  • "Aktivace/deaktivace snímače tlaku paliva" ____________________

  • "Aktivace/deaktivace snímače teploty vzduchu v sacím potrubí" ____________________

ID vybavení

Indikátor údržby

  • Provozní hodiny s ručním ovládáním

  • Provozní hodiny s automatickým ovládáním

  • Ruční ovládání přívodu paliva

  • Automatické ovládání přívodu paliva

Tlak v pomocném okruhu

  • Nastavená hodnota výstrahy při vysoké úrovni ____________________

Teplota v pomocném okruhu

  • Nastavená hodnota výstrahy při vysoké úrovni ____________________

Caterpillar Information System:

C27 Industrial Engine and C27 Locomotive Engine Product Description
C13, C15, and C18 Tier 4 Interim Engines Engine Shutdown While Idling
C13, C15, and C18 Tier 4 Interim Engines Engine Shutdown Occurrence
C13, C15, and C18 Tier 4 Interim Engines Retarder - Test
Repair of Pump Drive Gears for Torque Converters {3100, 3101} Repair of Pump Drive Gears for Torque Converters {3100, 3101}
C9.3 Engine for Caterpillar Built Machines Piston and Rings
2010/11/16 New Advanced Efficiency Filters Are Now Available {1408, 1435, 3004, 3067, 5068}
G3500B Engines Air Lines
2010/02/05 New Air Compressors Are Available for Certain On-Highway Truck Engines {1803}
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Reference Material
3406E, C-10 and C-12 Truck Engines Configuration Parameters
C9 Petroleum Engine Product Description
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131} Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Procedure for Installing the Air Seals that Are Included in the 337-7215 Seal Kit on Certain G3500 Engines{1063, 1380, 7555} Procedure for Installing the Air Seals that Are Included in the 337-7215 Seal Kit on Certain G3500 Engines{1063, 1380, 7555}
G3500B Engines Fuel Lines
C7 Marine Engine Closed Crankcase Ventilation (CCV) Filter Service Indicator - Check
C27 and C32 Tier 4 Engines Alternator and Regulator
2010/02/05 New Software Is Used for C175-16 Generator Set Engines {1901, 1920}
Installation Procedure for the New Floating Aftercooler Core for Certain C30 and C32 Marine Engines{1063, 1380, 3319} Installation Procedure for the New Floating Aftercooler Core for Certain C30 and C32 Marine Engines{1063, 1380, 3319}
2010/03/08 New Rocker Arm Assemblies Are Available on Some Machines {1123}
330F MHPU Mobile Hydraulic Power Unit Machine System Oil Filter (Return) - Case Drain Filter
C6.6 Marine Generator Set E255 Diagnostic Reset
C7.1 Industrial Engine and Generator Set Digital Throttle Position Sensor Circuit - Test
795F AC and 795F AC XQ Off-Highway Trucks Indicator Lamp (Inverter Active) - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.