Configuration Parameters
Show/hide table
Customer Specified Parameters     | ||
---|---|---|
Parameter     | Available Range or Options     | Default     |
Selected Engine Rating     | ||
"Rating Number"     | Dependent on engine power     | Unavailable     |
ECM Identification Parameters     | ||
Vehicle ID     | 17 Digits Available characters are dependent on the service tools.     |
all zeroes     |
Security Access Parameters     | ||
"ECM Wireless Communication Enable"     | Yes No     |
No     |
Vehicle Speed Parameters     | ||
ECM Wireless Communication Enable     | 2485 to 40705 PPKM (4000 to 65535 PPM)     |
8696 PPKM (14000 PPM)     |
Vehicle Speed Limit     | 48 to 204 km/h (30 to 127 mph)     |
204 km/h (127 mph)     |
VSL Protection     | 1300 to 2120 rpm     | 2120 rpm     |
Tachometer Calibration     |     | 113.0 pulses per revolution     |
Tachometer Calibration     | Yes No     |
Yes     |
Cruise Control Parameters     | ||
Low Cruise Control Speed Set Limit     | 24 to 204 km/h (15 to 127 mph)     |
204 km/h (127 mph)     |
High Cruise Control Speed Set Limit     | 48 to 204 km/h (30 to 127 mph)     |
204 km/h (127 mph)     |
High Cruise Control Speed Set Limit     | 48 to 204 km/h (30 to 127 mph)     |
204 km/h (127 mph)     |
Engine Retarder Mode     | Coast Latch Manual     |
Coast     |
Engine Retarder Minimum VSL Type     | Hard Limit Soft Limit     |
Hard Limit     |
Engine Retarder Minimum Vehicle Speed     | 0 to 204 km/h (0 to 127 mph)     |
0 km/h (0 mph)     |
Auto Retarder in Cruise Increment     | 0 to 8 km/h (0 to 5 mph)     |
3 km/h (2 mph)     |
Cruise/Idle/PTO Switch Configuration     | Set/Accel Set/Decel     |
Set/Accel     |
Soft Cruise Control     | Yes No     |
Yes     |
Idle Parameters     | ||
Idle Vehicle Speed Limit     | 2 to 24 km/h (1 to 15 mph)     |
2 km/h (1 mph)     |
Idle RPM Limit     | 600 rpm to 2120 rpm     | 2120 rpm     |
Idle/PTO RPM Ramp Rate     | 5 to 1000 rpm/sec     | 50 rpm/sec     |
Idle/PTO Bump RPM     | 5 to 500 rpm     | 20 rpm     |
Dedicated PTO Parameters     | ||
PTO Configuration     | Off Cab Switches Remote Switches Remote Throttle     |
Off     |
PTO Top Engine Limit     | 600 to 2120 rpm     | 2120 rpm     |
PTO Engine RPM Set Speed (0 = Off)     | Low Idle to PTO TEL rpm     | 0     |
PTO Engine RPM Set Speed     | Low Idle rpm to PTO TEL rpm     | 0     |
PTO to Set Speed     | Yes No     |
No     |
PTO Cab Controls RPM Limit     | Low idle rpm TEL rpm PTO TEL rpm     |
TEL rpm     |
PTO Kickout Vehicle Speed Limit     | 2 to 204 km/h (1 to 127 mph)     |
2 km/h (1 mph)     |
Torque Limit     | 270 N·m (200 lb ft) to Rated Torque     | 2700 N·m (2000 lb ft)     |
PTO Shutdown Time     | 3 to 1440 minutes     | 0     |
PTO Activates Cooling Fan     | Normal Continuous     |
Normal     |
Engine/Gear Parameters     | ||
Lower Gears Engine RPM Limit     | 1100 to 2120 rpm     | 2120 rpm     |
Lower Gears Turn Off Speed     | 5 to 48 km/h (3 to 30 mph)     |
5 km/h (3 mph)     |
Intermediate Gears Engine RPM Limit     | 1100 to 2120 rpm     | 2120 rpm     |
Intermediate Gears Turn Off Speed     | 8 to 80 km/h (5 to 50 mph)     |
8 km/h (5 mph)     |
Gear Down Protection RPM Limit     | 1300 to 2120 rpm     | 2120 rpm     |
Gear Down Protection Turn On Speed     | 48 to 204 km/h (30 to 127 mph)     |
204 km/h (127 mph)     |
Top Engine Limit (TEL)     | 1600 to 2120 rpm 1600 to 2150 rpm (1)     |
Dependent on the engine rating     |
Top Engine Limit with Droop     | Yes No     |
No     |
Low Idle Engine TPM     | 600 to 750 rpm     | 600 rpm     |
Transmission Style     | Manual Automatic Option 1 Automatic Option 2 Eaton Top 2     |
Manual     |
Eaton Top 2 Override with Cruise Switch     | Yes No     |
No     |
Top Gear Ratio     | 0.000 to 3.750     | 0.000     |
Top Gear Minus One Ratio     | 0.000 to 3.750     | 0.000     |
Top Gear Minus Two Ratio     | 0.000 to 3.750     | 0.000     |
Timer Parameters     | ||
Idle Shutdown Time     | 3 to 1440 minutes     | 0 minutes     |
Allow Idle Shutdown Override     | Yes No Outside Temperature Based J1587 Outside Temperature Based     |
Yes     |
Minimum Idle Shutdown Outside Temperature     | −40° to 49°C (−40° to 120°F)     |
49 °C (120 °F)     |
Maximum Idle Shutdown Outside Temperature     | −40° to 49°C (−40° to 120°F)     |
49 °C (120 °F)     |
A/C Switch Fan On-Time     | 1 to 600 seconds     | 0 seconds     |
Fan with Engine Retarder in High Mode     | Yes No     |
Yes     |
Engine Retarder Delay     | 0.0 to 5.0 seconds     | 0.0 seconds     |
Engine Monitoring Parameters     | ||
Engine Monitoring Mode     | OFF Warning Derate Shutdown     |
Warning     |
Coolant Level Sensor     | Yes No     |
Yes     |
Maintenance Parameters     | ||
Maintenance Indicator Mode     | Off Manual Distance Manual Hours Automatic Distance Automatic House     |
Off     |
PM1 Interval (Manual Maintenance Indicator Mode)     | 8050 to 56325 km (5000 to 35000 miles) 100 to 750 hours     |
24140 km (15000 miles) 300 hours     |
Engine Oil Capacity (Automatic Maintenance Indicator Mode)     |
19 to 57 L (20 to 60 qt)     |
C-10: 34 L (36 qt) C-12: 34 L (36 qt) 3406E: 38 L (40 qt)     |
Trip Parameters     | ||
Fuel Correction Factor     | -63.5 to 63.5     | 0     |
Dash Display Access Parameters     | ||
Dash-Change Fuel Correction Factor     | Yes No     |
No     |
Dash-PM1 Reset     | Yes No     |
No     |
Dash-Fleet Trip Reset     | Yes No     |
No     |
Dash-State Selection     | Yes No     |
Yes     |
Theft Deterrent System Control     | Yes No     |
No     |
Theft Deterrent Password     | Four Characters     | 0000     |
Quick Stop Rate     | 0 to 24 km/h per second (0 to 15 mph per second)     | 0 km/h seconds (0 mph per second)     |
Output Selections     | ||
Auxiliary Output 2     | None Auxiliary Brake Engine Running Output Shutdown Output Shift Solenoid     |
Auxiliary Brake     |
Auxiliary Output 3     | None Engine Running Out Shutdown Output Lockout Solenoid Cooling Fan #2 Output     |
None     |
Auxiliary Output 4     | Cooling Fan Auxiliary Brake Engine Running Output Shutdown Output     |
Cooling Fan     |
Fan Control Type     | None On/Off Three-Speed Fan     |
On/Off     |
Customer Passwords     | ||
Customer Password (1)     | 8 Digits Available characters are dependent on the service tools.     |
    |
Customer Password (2)     | ||
Data Link Parameters     | ||
Power Train Data Link     | Off J1922 J1939 J1922 and J1939     |
J1922     |
ECM Data/Time Clock     | ||
Month, day, year, hour, minute, second     | mmm,ddd,yyy aaa:abb:cc     |
    |
Parameter Lockout     | ||
Refer to Troubleshooting, "Customer Specified Parameters" for a list of the lockable parameters.     | Unlocked/Locked     | Locked     |
Show/hide table
( 1 ) | 3406E ratings provide this expanded range. |
Caterpillar Information System:
C9 Petroleum Engine Product Description
C15 and C18 Engines Electronic Unit Injector - Check/Replace
C9 Petroleum Engines Grounding Stud - Inspect/Clean/Tighten
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Engine Valve Lash - Check
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace - If Equipped
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Coolant Temperature Regulator - Replace
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Coolant Sample (Level 2) - Obtain
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Coolant Sample (Level 1) - Obtain
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Coolant Level - Check
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Coolant Extender (ELC) - Add
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Coolant (ELC) - Change
3508C, 3512C, and 3516C Locomotive Engines Diagnostic Trouble Codes
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Reference Material
2010/02/05 New Air Compressors Are Available for Certain On-Highway Truck Engines {1803}
G3500B Engines Air Lines
2010/11/16 New Advanced Efficiency Filters Are Now Available {1408, 1435, 3004, 3067, 5068}
C9.3 Engine for Caterpillar Built Machines Piston and Rings
Repair of Pump Drive Gears for Torque Converters {3100, 3101} Repair of Pump Drive Gears for Torque Converters {3100, 3101}
C13, C15, and C18 Tier 4 Interim Engines Retarder - Test
C13, C15, and C18 Tier 4 Interim Engines Engine Shutdown Occurrence
C13, C15, and C18 Tier 4 Interim Engines Engine Shutdown While Idling
C27 Industrial Engine and C27 Locomotive Engine Product Description
C27 Industrial Engine and C27 Locomotive Engine Configuration Parameters
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131} Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}