1979/10/29 Caterpillar


New--3208 Engine Maintenance Tips Wall Chart {0374,1000}

Usage:


A 3208 Engine Maintenance Tips Wall Chart is available for fast, easy reference. In short, clear form, the chart gives basic maintenance instructions for the four most important engine systems: lubrication, fuel, cooling and air induction. See Illustration 1. Easy access to this type of information is most important during cold temperatures, so the chart has been specifically made to hang on bulletin boards in customer shops. In addition, the chart is large-15 × 22" (381 × 558 mm), and made of vinyl impregnated paper which makes it grease resistant and tear resistant.

Charts are available in packages of 10 and 50: Form No. SEBU5691-01 is a single chart. It is available in packages of 10, so dealers are encouraged to order in quantities of 10.


Illustration 1. Single SEBU5691-01 Chart.


Illustration 2. SEBU5709 package of 50 in display box.

Form No. SEBU5709 is a package of 50 in a display box (Illustration 2).

The chart is also available in Spanish, Form No. SSBU5691-01.

Caterpillar Information System:

1979/10/22 Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22 Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22 New Connecting Rod Is Tapered In Piston Pin Area{1218}
1979/10/22 Improved Seal Used In Raw Water Pump On Marine Engines{1371}
1979/10/22 New Valve Rotator And New Oil Shield Are Available{1104,1105,1109}
1979/10/22 Size Of Glass Beads Is Important When Used To Clean Engine And Turbocharger Parts{0670,1052,1053,1077,1105,1214}
1979/10/22 Cold Temperature Starting Procedures For Air Compressor And Drill Engines{0374,1000,1450}
1979/10/22 New Coolant Temperature Regulator Housing And Vent Line Valve Give Better Control Of Engine Cooling; Conversion Kits Available{1380,1355}
1979/10/22 Use The FT1482 Stop Collar Assembly With The 1P4000 Line Boring Tool Group{0663}
1979/10/15 New Camshaft Housing Gasket Has Increased Resistance To High Temperature{1113}
1979/10/15 Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/08 Supplement To Special Instruction, Form SEHS6895, "Bench Testing Hydraulic Components" Now Available On Microfiche{0650}
1979/10/29 The FT1486 Chain Assembly Can Be Used For Emergency Repair Of Front Power Takeoff Clutches {3055}
1979/10/29 Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29 New Repair Kit Is Available For Service Of Hydraulic Jack {0642}
1979/10/29 7N9843 Fuel Injection Valve Nozzle Assembly Now Used In Truck Engines {1254}
1979/10/29 Improved Seal Now Used In Seawater Pump {1371}
1979/11/05 Correct Installation Of Track Shoe Nuts{4170,4179}
1979/11/05 Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05 Support Plates Must Be Used To Install Earlier Marine Transmissions{3300}
1979/11/05 Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/12 Puller Studs Of Same Size Can Have Different Work Capacities{0621}
1979/11/12 Repair Of Damaged Or Worn Balancer Shaft Bores{1201,0663,1220}
1979/11/26 More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.