Support Plates Must Be Used To Install Earlier Marine Transmissions{3300}
Usage:
7271 Marine Transmissions ( 36W1-225)
Description of Change: Support plates must be used to install earlier 7271 Marine Transmissions (36W1-225). These plates are 50.0 mm (1.969") thick, and must be used to give the necessary clearance for mounting holes to be drilled in the rails of the vessel. Also, the new plates are more rigid and give better support than the thinner plates formerly used. On 7271 Marine Transmissions 36W226-up, a change to the transmission housing gives the necessary clearance and rigid support without the plates.
Adaptable To: All 7271 Marine Transmissions 36W1-225.
Installation of support plates and hardware for 7271 Marine Transmission.
Caterpillar Information System:
1979/11/05 Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05 Correct Installation Of Track Shoe Nuts{4170,4179}
1979/10/29 Improved Seal Now Used In Seawater Pump {1371}
1979/10/29 7N9843 Fuel Injection Valve Nozzle Assembly Now Used In Truck Engines {1254}
1979/10/29 New Repair Kit Is Available For Service Of Hydraulic Jack {0642}
1979/10/29 Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29 The FT1486 Chain Assembly Can Be Used For Emergency Repair Of Front Power Takeoff Clutches {3055}
1979/10/29 New--3208 Engine Maintenance Tips Wall Chart {0374,1000}
1979/10/22 Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22 Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22 New Connecting Rod Is Tapered In Piston Pin Area{1218}
1979/10/22 Improved Seal Used In Raw Water Pump On Marine Engines{1371}
1979/11/05 Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/12 Puller Studs Of Same Size Can Have Different Work Capacities{0621}
1979/11/12 Repair Of Damaged Or Worn Balancer Shaft Bores{1201,0663,1220}
1979/11/26 More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26 Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26 New Cylinder Block Has More Material Around Liner Seat Area{1201}
1979/11/26 Former Oil Pump Group Is Now Used Again{1304}
1979/11/26 Fabricated Tester For Regulator-Exciter Control Assemblies Used On SR-4 And SRCR Generators{0652,4451,4452,4454,4467}
1979/12/10 Improved 6V2012 Micrometer Depth Gauge Set Has Increased Range To Permit Deeper Measurement{0653,5070}
1979/12/10 Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10 New Cylinder Heads Are More Rigid And Stronger{1100}
1979/12/17 Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}