Supplement To Special Instruction, Form SEHS6895, "Bench Testing Hydraulic Components" Now Available On Microfiche{0650}
Usage:
Form SEHS7648, a temporary supplement to Special Instruction, Form SEHS6895 "Bench Testing Hydraulic Components" is now available only on microfiche as part of the Special Instruction microfiche library. The supplement gives test specifications for specific transmissions on new models. This information has been released on microfiche to make it immediately available to dealers. In the future, transmission test specifications for new models will also be released on microfiche as information becomes available. This information will then be included in Special Instruction, Form SEHS6895 "Bench Testing Hydraulic Components" at the time of next revision.
Caterpillar Information System:
1979/10/08 New Hydromechanical Shut-Off Is Available{7418,7403}
1979/10/08 Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08 Warning: Excessive Heat Can Cause A Tire Explosion{4203}
1979/10/01 New Planet Gears For Power Shift Transmissions And/Or Winches Have No Oil Grooves On the Faces{3176,5165}
1979/10/01 New Aftercooler Core Has Stronger Construction And Corrosion Resistance{1064}
1979/10/01 Tips For SIRS (Service Information Retrieval System) Users{0374}
1979/10/01 Steel Plates Are Now Used To Hold The Element In Position In The Panel-Type Air Cleaner Housing Assembly{1051,1054}
1979/10/01 New Liner Seat Inserts For Spacer Plate Cylinder Blocks Are Made Of Stainless Steel{1217,1201,0663}
1979/09/24 Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24 8S9901 Tool Cart Can Be Adapted To Hold Both The 5P3600 Hydraulic Flow Meter Group And The Tools Used With It{0651}
1979/09/17 6V2042 Alignment Yoke And 6V2043 Alignment Bar Available{0653,3305,4450}
1979/09/17 New Bracket Available For Installation Of Jacket Water Heater{1383}
1979/10/15 Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15 New Camshaft Housing Gasket Has Increased Resistance To High Temperature{1113}
1979/10/22 Use The FT1482 Stop Collar Assembly With The 1P4000 Line Boring Tool Group{0663}
1979/10/22 New Coolant Temperature Regulator Housing And Vent Line Valve Give Better Control Of Engine Cooling; Conversion Kits Available{1380,1355}
1979/10/22 Cold Temperature Starting Procedures For Air Compressor And Drill Engines{0374,1000,1450}
1979/10/22 Size Of Glass Beads Is Important When Used To Clean Engine And Turbocharger Parts{0670,1052,1053,1077,1105,1214}
1979/10/22 New Valve Rotator And New Oil Shield Are Available{1104,1105,1109}
1979/10/22 Improved Seal Used In Raw Water Pump On Marine Engines{1371}
1979/10/22 New Connecting Rod Is Tapered In Piston Pin Area{1218}
1979/10/22 Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22 Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/29 New--3208 Engine Maintenance Tips Wall Chart {0374,1000}