3500B Engines for Caterpillar Built Power Modules Caterpillar


Engine Oil Filter

Usage:

3516B 9F2


图 1g02841297
典型示例
前视图


图 2g02559976
左视图

表 1
技术规格 - 115-7841 发动机机油滤清器总成和 242-6278 发动机机油滤清器总成 
项目  数量  零件  技术规格说明 
组装前,使用清洁的发动机机油稍微润滑孔。 
2W-1969 旁通阀  旁通阀在孔中应自由移动。
开始开启压力为 287 ± 7 kPa (42 ± 1 psi)
完全开启压力为 480 ± 7 kPa (70 ± 1 psi)。 
2W-1635 弹簧  测试力下的长度为 102.0 mm (4.02 inch)
测试力为 518 ± 26 N (116 ± 6 lb)
测试后的自由长度为 143.4 mm (5.65 inch)。 
264-0450 卡箍组件  采用以下顺序拧紧卡箍组件:
1. 将卡箍组件拧紧到管上。
2. 将卡箍组件的螺栓拧紧到弯头至扭矩 47 ± 9 N·m (35 ± 7 lb ft)
3. 将卡箍组件的螺栓拧紧到管至扭矩 47 ± 9 N·m (35 ± 7 lb ft)。 
100-8075 卡箍组件 
165-3931 螺栓  拧紧至扭矩为 55 ± 7 N·m (41 ± 5 lb ft)。 
0L-1143 螺栓  拧紧至扭矩为 55 ± 7 N·m (41 ± 5 lb ft)。 

Caterpillar Information System:

797F and 797F XQ Off-Highway Trucks Backup Alarm
3500 Generator Sets Product Installation
XQC1200 Power Module Declaration of Conformity
CX35-P800 Petroleum Transmission and CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages Flywheel
3508B, 3512B, and 3516B High Displacement Generator Sets Sound Information
3508, 3512 and 3516 Generator Set Engines Exhaust Manifold - Remove and Install
2009/09/30 Proper Usage of the Adjustment for the Fuel Injector Synchronization on 3600 Diesel Engines with Mechanical Unit Injectors (MUI) {1290}
793F Off-Highway Truck Machine Systems Steering Control Valve - Assemble
793F Off-Highway Truck Machine Systems Steering Control Valve - Disassemble
3508, 3512 and 3516 Generator Set Engines Exhaust Elbow - Remove and Install
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0171 FMI 04
C7.1 Industrial Engine and Generator Set ARD Pilot Fuel Pressure Is High
336E Excavator Hydraulic System Main Hydraulic Pump
793F Off-Highway Truck Machine Systems Makeup Valve (Hydraulic Fan Motor) - Remove and Install
793F Off-Highway Truck Machine Systems Slack Adjuster (Front) - Remove and Install
793F Off-Highway Truck Machine Systems Slack Adjuster (Rear) - Remove and Install
C7.1 Industrial Engine and Generator Set ARD Pilot Fuel Pressure Is Low
793F Off-Highway Truck Machine Systems Slack Adjuster - Disassemble
793F Off-Highway Truck Machine Systems Slack Adjuster - Assemble
2010/03/22 New Heat Shields Are Used on G3520C Engines {1067, 1408}
797F and 797F XQ Off-Highway Trucks Jacking Locations
2010/01/08 Warranty Claims for Turbocharger Gaskets on Certain Marine Engines {1061}
2009/10/01 New Instructions for Improved Starting On Some Generator Sets With C6.6 Engines {1901, 1920}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.