New Instructions for Improved Starting On Some Generator Sets With C6.6 Engines {1901, 1920}
- Engine:
- C6.6 (S/N: N6D107-107,158-161,228-235,303-303,677-678,680-684,690-690,700-700,708-709,711-711,714-714,741-741,750-750,753-753,756-756,758-758,764-764,768-769,785-785,797-799,812-812,815-820,826-829,832-834,843-844,846-846,854-856,858-858,860-861,868-868,870-878,883-886,889-889,891-891,894-894,898-901,921-922,926-926,934-934,937-938,956-956,962-968,976-978,989-989,1001-1002,1005-1005,1007-1008,1010-1011,1014-1014,1016-1018,1020-1020,1022-1022,1047-1052,1056-1056,1066-1066,1072-1072,1077-1078,1080-1080,1082-1082,1087-1087,1096-1096,1102-1102,1135-1135,1138-1141,1144-1146,1151-1151,1156-1157,1163-1163,1165-1165,1170-1170,1172-1172,1181-1181,1185-1185,1192-1194,1196-1196,1212-1212,1215-1216,1240-1240,1242-1242)
The information in this article will improve the performance of the engine in instances of difficult start-up for the serial numbers that are listed above.
Configuration of the Start Aid Activation Time
Show/hide table
 | |
| Illustration 1 | g01992342 |
The "Start Aid Activation Time " is a required parameter that will aid in starting and needs to be configured correctly. The value for the "Start Aid Activation Time" (1) within Caterpillar Electronic Technician needs to be set to 6 seconds.
Caterpillar Information System:
2010/01/08 Warranty Claims for Turbocharger Gaskets on Certain Marine Engines {1061}
797F and 797F XQ Off-Highway Trucks Jacking Locations
2010/03/22 New Heat Shields Are Used on G3520C Engines {1067, 1408}
793F Off-Highway Truck Machine Systems Slack Adjuster - Assemble
793F Off-Highway Truck Machine Systems Slack Adjuster - Disassemble
C7.1 Industrial Engine and Generator Set ARD Pilot Fuel Pressure Is Low
793F Off-Highway Truck Machine Systems Slack Adjuster (Rear) - Remove and Install
793F Off-Highway Truck Machine Systems Slack Adjuster (Front) - Remove and Install
793F Off-Highway Truck Machine Systems Makeup Valve (Hydraulic Fan Motor) - Remove and Install
336E Excavator Hydraulic System Main Hydraulic Pump
C7.1 Industrial Engine and Generator Set ARD Pilot Fuel Pressure Is High
3500B Engines for Caterpillar Built Power Modules Engine Oil Filter
C32 Petroleum Generator Sets Decommissioning and Disposal
Selecting the Correct Head Gasket for Reman Cylinder Heads on Certain Truck Engines{1124} Selecting the Correct Head Gasket for Reman Cylinder Heads on Certain Truck Engines{1124}
3500 Industrial Engines Cylinder Head
2009/10/29 Fuel Injection Pump and Fuel Priming Pump {1251, 1258, 1260, 1290}
C7.1 Industrial Engine and Generator Set ARD Nozzle Heater - Test
793F and 797F Off-Highway Trucks Power Train Electronic Control System System Schematic
2009/11/05 A New Transmission Harness and a New Position Sensor Group Are Now Used on Certain Cat Products {1408, 1439, 3167}
3000 Frame SR5 Electric Power Generation Generator Fan - Remove and Install
Proper Storage Procedures for Commercial Engines {0355, 1000} Proper Storage Procedures for Commercial Engines {0355, 1000}
793F Off-Highway Truck Machine Systems Brake Release Pump and Motor (Parking and Secondary) - Disassemble
793F Off-Highway Truck Machine Systems Brake Release Pump and Motor (Parking and Secondary) - Assemble
3000 Frame SR5 Electric Power Generation Generator Operation