Engine Air Filter Secondary Element - Replace
Show/hide table
| PERHATIAN |
|---|
|
Gantilah selalu elemen sekunder. Jangan mencoba menggunakannya kembali dengan cara dibersihkan. Kerusakan pada engine dapat terjadi. |
Catatan: Ganti elemen sekunder filter udara engine apabila Anda menyervis elemen primer filter udara engine untuk yang ketiga kalinya. Ganti elemen filter sekunder bila asap buangan tetap berwarna hitam dan elemen filter primer yang bersih telah dipasang.
Catatan: Untuk mengakses elemen filter udara, Anda mungkin perlu menggunakan sistem akses portabel (tangga, pijakan, lift orang, atau sistem akses portabel lainnya) yang sesuai dan mematuhi peraturan setempat.
- Siapkan alat berat untuk perawatan. Gunakan petunjuk pada Buku Petunjuk Pengoperasian dan Perawatan, "Mempersiapkan Alat Berat untuk Perawatan".
- Buka penutup filter udara dan lepaskan elemen filter primer dari rumah filter udara.
Show/hide table
Ilustrasi 1 g01903515 (1) Elemen filter sekunder - Lepaskan elemen filter sekunder (1) dan buang dengan benar.
- Tutup lubang pemasukan udara. Bersihkan bagian dalam rumah saringan udara (air cleaner).
- Buka lubang pemasukan udara. Pasang elemen filter sekunder yang baru.
- Pasang elemen filter primer dan pasang penutup filter udara.
Caterpillar Information System:
Improved Method for Installing the Actual Gear Position Sensor {1439, 3061} Improved Method for Installing the Actual Gear Position Sensor {1439, 3061}
3508C, 3512C, and 3516C Locomotive Engines Acceleration Is Poor or Throttle Response Is Poor
C9.3 Tier 4 Final Engines Crankcase Pressure Sensor
2009/10/29 A New Bowl for the Fuel/Water Separator Is Available {1261, 1263}
2009/10/29 A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
793F and 797F Off-Highway Trucks Power Train Electronic Control System Retarder Is Aggressive
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125} Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
C9.3 Industrial Engine Air Compressor
C13 Engines for Caterpillar Built Machines Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
C7.1 Industrial Engine and Generator Set Indicator Lamp Circuit - Test
C13 Engines for Caterpillar Built Machines Catalyst - Remove and Install - Diesel Oxidation Catalyst, Clean Emissions Module
C7.1 Industrial Engine and Generator Set Idle Validation Switch Circuit - Test
C9.3 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
C9.3 Tier 4 Final Engines Water Temperature Regulator
C13 Engines for Caterpillar Built Machines Muffler - Remove and Install - Clean Emissions Module
C9.3 Tier 4 Interim Engines Injector Solenoid - Test
C9.3 Engines for Caterpillar Built Machines Fuel Injection Pump - Test
2011/04/04 A New Harness Assembly for the Right Hand Console is Now Available {1408}
C9 Marine Engines General Hazard Information
3500 Engines Turbocharger
3500 Engines Air Inlet and Exhaust Lines
3500 Engines Air Lines
C6.6 Industrial Engine Walk-Around Inspection
G3304B and G3306B Engines Oil Pressure Is Low