Muffler - Remove and Install - Clean Emissions Module
- Attach a suitable lifting device to bracket (2) and the air cleaner. The weight of bracket (2) and the air cleaner is approximately
43 kg (95 lb) . - Remove bolts (1).
Show/hide table
Illustration 2 g01904473 - Remove bolts (3), bracket (2), and the air cleaner.
Show/hide table
Illustration 3 g01904474 - Remove clamp (4).
- Attach a suitable lifting device to muffler (6). The weight of muffler (6) is approximately
50 kg (110 lb) . Disconnect clamp assemblies (5) and reposition clamp assemblies (5). Remove muffler (6).
Show/hide table
Illustration 1 | g01904422 |
- Install muffler (6) in reverse order of removal.
- Tighten clamp (4) to a torque of
12 ± 1 N·m (106 ± 9 lb in) . Use hand tools in order to tighten clamp assemblies (5).
- Tighten clamp (4) to a torque of
Caterpillar Information System:
C9.3 Tier 4 Final Engines Water Temperature Regulator
C9.3 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
797 and 797B Off-Highway Truck/Tractor Engine Air Filter Secondary Element - Replace
Improved Method for Installing the Actual Gear Position Sensor {1439, 3061} Improved Method for Installing the Actual Gear Position Sensor {1439, 3061}
3508C, 3512C, and 3516C Locomotive Engines Acceleration Is Poor or Throttle Response Is Poor
C9.3 Tier 4 Final Engines Crankcase Pressure Sensor
2009/10/29 A New Bowl for the Fuel/Water Separator Is Available {1261, 1263}
2009/10/29 A New Bowl for the Fuel/Water Separator Is Used {1261, 1263}
793F and 797F Off-Highway Trucks Power Train Electronic Control System Retarder Is Aggressive
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125} Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
C9.3 Industrial Engine Air Compressor
C13 Engines for Caterpillar Built Machines Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
C9.3 Tier 4 Interim Engines Injector Solenoid - Test
C9.3 Engines for Caterpillar Built Machines Fuel Injection Pump - Test
2011/04/04 A New Harness Assembly for the Right Hand Console is Now Available {1408}
C9 Marine Engines General Hazard Information
3500 Engines Turbocharger
3500 Engines Air Inlet and Exhaust Lines
3500 Engines Air Lines
C6.6 Industrial Engine Walk-Around Inspection
G3304B and G3306B Engines Oil Pressure Is Low
C7.1 Industrial Engine Cooling System Coolant (DEAC) - Change
G3304B and G3306B Engines Coolant Temperature Is High
G3304B and G3306B Engines Oil Temperature Is High