C27 and C32 Engines for Caterpillar Built Machines Caterpillar


Valve Mechanism Cover - Remove and Install - C32

Usage:

854K 221

Prosedur Pelepasan


PERHATIAN

Pastikan semua suku cadang bersih dari kontaminan.

Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen.




    Ilustrasi 1g01147941

  1. Lepaskan baut (1), penutup mekanisme katup (2), dan seal.

Prosedur Pemasangan


PERHATIAN

Pastikan semua suku cadang bersih dari kontaminan.

Kontaminan dapat menyebabkan keausan yang cepat dan mempersingkat umur komponen.




    Ilustrasi 2g06078165


    Ilustrasi 3g06078161

    Catatan: Pastikan seal dipasang dengan benar pada penutup mekanisme katup. Bagian sempit pada seal harus menghadap keluar, menjauh dari penutup mekanisme katup.

  1. Pasang seal (3) pada penutup mekanisme katup (2).


    Ilustrasi 4g01147941


    Ilustrasi 5g03225827

  2. Letakkan penutup mekanisme katup (2) di dudukan penutup mekanisme katup. Pasang baut (1). Kencangkan baut (1) dengan urutan seperti yang ditunjukkan pada gambar 5.

Caterpillar Information System:

3412C Generator Set Generator Bearing Temperature - Measure/Record
C9.3 Engines for Caterpillar Built Machines Electrical Connectors - Inspect
C11 and C13 Industrial Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C7.1 Industrial Engine and Generator Set Analog Throttle Position Sensor Circuit - Test
C7.1 Industrial Engine and Generator Set No Diagnostic Codes Detected
789D, 793F, and 797F Off-Highway Truck Monitoring System Connector Contact Description
2009/05/04 A Repair Kit for the Magnet is Now Available for the AccuGrade CD700 Display {7490}
C13 Tier 4 Final Engines Lubrication System
C18 Marine Generator Set Configuration Parameters
793F and 797F Off-Highway Trucks Chassis Electronic Control System MID 087 - CID 0800 - FMI 09
PM3516 Power Modules Fumes Disposal Filter - Drain
C9.3 Engines for Caterpillar Built Machines ECM Software - Install
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1437 - FMI 05
2009/04/27 How Is Service Information Accessed / Used {1000}
C13 Tier 4 Final Engines General Information - C13 Engines
C9.3 Engines for Caterpillar Built Machines Injector Trim File - Install
C-15 and C-16 Industrial Engines Engine Speed/Timing Sensors - Check/Clean/Calibrate
C13 Engines for Caterpillar Built Machines Ignition Coil - Remove and Install - Clean Emissions Module
C-15 Petroleum Engine Engine Speed/Timing Sensors - Check/Clean/Calibrate
Improved Outlet Pipe for the Turbocharger{1052, 1353} Improved Outlet Pipe for the Turbocharger{1052, 1353}
793F CMD (Conversion) Off-Highway Truck Braking System MID 116 - CID 0835 - FMI 08
C15 and C18 Industrial Engines Air Inlet Elbow - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.