1988/06/27 Caterpillar


Charts And Decals Available For Lubrication And Maintenance Intervals{0370}

Usage:


SUPPLEMENT: 10/02/89

SERVICE MAGAZINES: ...FEBRUARY 29, 1988; PAGE 13; "List Of Engine Wall Charts Available" on D379, D398, D399, 3300, 3400, 3500 Families of Engines. ...JUNE 27, 1988; PAGE 3; "Charts and Decals Available for Lubrication and Maintenance Intervals." ...NOVEMBER 28, 1988; PAGE 5; "More Charts And Decals Available For Lubrication And Maintenance Intervals." ...MARCH 6, 1989; PAGE 6; "New Engine Wall Charts Give Maintenance Management Recommendations" for D379, D398, D399, 3114, 3116, 3208, 3300, 3400, 3500 Families of Industrial, Marine and Generator Set Engines.

Disregard these articles and make reference to the new article "Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals" in this issue.

--------------- END SUPPLEMENT ---------------

Lubrication and maintenance interval charts and decals are now available for certain track-type and wheel-type machines.

The charts give service hour intervals, locations, lubricants, refill capacities and daily walk-around inspection procedures. The charts are produced on oil and tear resistant loose-leaf sheets.

The decals contain service hour intervals, locations, lubricants and refill capacities and can be placed on the machine.

The chart lists all form numbers available at this time and will be updated as more become available for other machines.

Caterpillar Information System:

1988/06/20 Two 11 mm Injectors Available For Parts Service{1250,1290}
1988/06/20 Large Engine Blowby Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1988/06/20 Software Upgrade For The 8T5282 Digital Diagnostic Tool (DDT){0600,1250}
1988/06/20 Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/13 Rotor Shaft Keyways Are Now "{4454}
1988/06/13 Additional Information For Installing Fuel Injectors{1290,1257}
1988/06/13 Piston Application Guide{1214,1215}
1988/06/13 New Crankshaft Damper Has Rubber Bonded To Hub And Ring{1202,1205}
1988/06/06 Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06 Reusability Guidelines For Phosphate/Oil-Coated And Zinc-Plated Fasteners{7553}
1988/06/06 Lubricant Supplements List Specifications For CXP Lubricants{0645,7000}
1988/06/06 Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/07/04 Improvement To 2P5535 Stud Extractor Group {0700,4210}
1988/07/04 New Service Tools Available {0600}
1988/07/04 New 1U8758 Pliers Available For Removing And Installing Large Internal Retaining Rings In Power Shift Transmissions {0603,3150}
1988/07/04 Neutral Lead (Wire No. 26) Eliminated On VR3 And VR4 Voltage Regulators {4453,4474}
1988/07/04 Fans Now Have Five Blades Instead Of Four {1356}
1988/07/04 Vehicle Speed Calibration Can Be Corrected Without Knowing Number Of Transmission Chopper Teeth {1250,3233}
1988/07/11 Seals In Variable Timing Advance Available For Parts Service{1272}
1988/07/18 Identification Film For EMS Panels Is Written In Four Languages {7490}
1988/07/25 Replacement Fuel Injector Nozzles With New Nose Cones Available{0706,1254,1290}
1988/07/25 High Pressure Sealed Cap Available For Nipples Used For Diagnostic Testing And S·O·S Oil Sampling{0781,0783,0784,7770}
1988/08/01 Silicone Water Seals Reinstated In Cylinder Heads{1115,1300}
1988/08/01 Ground Wire Added To SR 4 Generators With 580, 680, And 800 Frames{4478}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.