C18 Fire Pump Engine Caterpillar


Diagnostic Flash Code Retrieval

Usage:

C18 NBB
电子控制系统故障通过以下几种代码报告: 闪烁代码, FMI代码, 诊断代码 和 事件代码.

有关闪烁代码的更多详情,请参阅故障排除, "闪烁代码"。

有关FMI代码的更多详情,请参阅故障排除, "诊断代码"。

有关诊断代码的更多详情,请参阅故障排除, "诊断代码"。

有关事件代码的更多详情,请参阅故障排除, "事件代码"。

表 1
事件代码    
事件代码 (EID)     闪烁代码     说明    
2143-01     62     发动机冷却液位低警告    
2143-02     发动机冷却液液位低降额
2143-03     发动机冷却液位低停机
194-02     无     排气温度高降额    
198-01     63     燃料压力低警告(仅 HEUI)    
198-02     燃料压力低降额(仅 HEUI)
096-01     燃油压力高警告
360-01     46     机油压力低警告    
360-02     机油压力低降额
360-03     机油压力低停机
361-01     61     发动机冷却液温度高警告    
361-02     发动机冷却液温度高降额
361-03     发动机冷却液温度高停机
362-01     35     发动机超速警告    
362-03     发动机超速停机
363-01     65     燃油温度高警告    
363-02     燃料温度高降额
363-03     燃油温度高停机
443-01     68     辅助压力高警告    
443-02     辅助压力高降额
443-03     辅助压力高停机
445-01     67     辅助温度高警告    
445-02     辅助温度高降额
445-03     辅助温度高停机
539-01     64     进气歧管温度高警告    
539-02     进气歧管空气温度高降额

表 2
诊断编码和闪烁代码    
CID/FMI 代码     闪烁代码     诊断代码说明    
01-05     71     油缸 1 喷油器电流低    
01-06     油缸 1 喷油器电流高
02-05     72     油缸 2 喷油器电流低    
02-06     油缸 2 喷油器电流高
03-05     73     油缸 3 喷油器电流低    
03-06     油缸 3 喷油器电流高
04-05     74     油缸 4 喷油器电流低    
04-06     油缸 4 喷油器电流高
05-05     75     油缸 5 喷油器电流低    
05-06     油缸 5 喷油器电流高
06-05     76     油缸 6 喷油器电流低    
06-06     油缸 6 喷油器电流高
41-03     21     +8伏电源电压高    
41-04     +8伏电源电压低
42-05     18     喷油动作阀电流低    
42-06     喷油动作阀电流高
91-08     32     油门位置异常信号频率    
91-13     28     油门位置需要标定    
94-03     37     燃油压力电压高    
94-04     燃油压力电压低
100-03     24     发动机机油压力电压高    
100-04     发动机机油压力电压低
100-10     发动机机油压力信号异常变化率
102-03     25     增压压力电压高    
102-04     增压压力电压低
102-10     增压压力力信号异常变化率
110-03     27     发动机冷却液温度电压高    
110-04     发动机冷却液温度电压低
111-02     62     发动机冷却液温度间歇    
168-00     51     发动机控制模块(ECM)电池电压过高    
168-01     ECM 电池电压偏低
168-02     ECM 电池电压间歇
172-03     38     进气歧管温度电压高    
172-04     进气歧管温度电压低
174-03     13     燃油温度电压高    
174-04     燃油温度电压低
190-08     34     主发动机转速异常信号频率    
253-02     56     个性模块不匹配    
261-13     42     发动机转速信号需要标定    
262-03     21     +5伏电源电压高    
262-04     +5伏电源电压低
268-02     56     检查客户或系统参数    
274-03     26     大气压力电压高    
274-04     大气压力电压低
296-09     58     变速箱控制异常更新率    
336-07     57     发动机控制开关 (ECM 选择器开关)    
342-08     34     辅助发动机转速异常信号频率    
545-05     16     乙醚起动继电器电流低    
545-06     乙醚起动继电器电流高
617-05     49     进气加热器电流低    
617-06     进气加热器电流高
650-12     52     线束代码    
1435-09     53     系统主控模块    
1632-09     54     备用发动机控制模块 (ECM) 不可用    
1785-03     25     进气歧管压力传感器电压高    
1785-04     进气歧管压力传感器电压低
1785-10     进气歧管压力传感器信号异常变化率
2417-05     16     乙醚电磁阀电流低    
2417-06     乙醚电磁阀电流高

Caterpillar Information System:

TH48-E70-C27I, TH48-E70-C32I and TH48-E70-C32P Petroleum Power Train packages and TH48-E70 Petroleum Transmission Power Train Electronic Control System Transmission Fill - Calibrate
XQ175 Rental Generator Set Safety Messages
374F Excavator Machine System Track Adjuster
G3500B Engines Exhaust Temperature - Test
2009/01/05 Rocker Assembly Seals {1100, 1107, 1123}
2009/01/05 An Updated Torque Procedure Is Used for the Shutoff Valve Assembly on Certain Engines {1329, 1380, 1395}
C18 Fire Pump Engine Engine Speed/Timing Sensor - Clean/Inspect
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Flywheel Housing - Remove
G3516 Petroleum Engines Flywheel - Remove and Install
G3516 Petroleum Engines Drive Housing (Front) - Remove and Install
Removal and Rerouting of the Shunt Line{1350, 1380} Removal and Rerouting of the Shunt Line{1350, 1380}
G3516 Petroleum Engines Engine Oil Filter Housing - Install
2009/01/26 Adjustment of the Circuit Breaker Is Required During Setup of Generator Set {1420}
C18 Fire Pump Engine Heat Exchanger - Inspect
C18 Fire Pump Engine Zinc Rods - Inspect/Replace
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Shutdown
2009/01/05 New Rain Caps Are Used on Some Generator Sets {1061, 1062, 1072}
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Flywheel Housing - Install
3600 and C280 Diesel Engine Fluids Recommendations Biodiesel
2009/01/26 Final Drive Duo-Cone Seal Assembly Information Update {7561}
797F and 797F XQ Off-Highway Truck/Tractor Braking System Brake Hydraulic System
797F and 797F XQ Off-Highway Truck/Tractor Braking System Electronic Control Module (Brake)
G3500B Engines Air/Fuel Ratio Problem
G3516 Petroleum Engines Valve Cover and Spark Plug - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.