Sensor
The "Pressure/Temperature Module" receives information concerning the engine coolant temperature and the engine oil pressure.
The engine oil pressure and coolant temperature transducer module is located in the engine junction box. The sensors send an analog signal to the transducer module which is converted to a PWM signal. The PWM signal is sent to the SCM. The coolant temperature sensor and the oil pressure sensor are connected to the module and the engine Status Control Module (SCM) by a wiring harness.
Caterpillar Information System:
3512C and 3516C Marine Auxiliary and Generator Set Engines Generator Isolating for Maintenance
2008/07/14 New Primary Fuel Filters are Available {1260, 1261}
C6.6 Marine Generator Set Coolant Temperature Is Too High - Raw Water Cooling System
2008/11/03 New AccuGrade® 450 MHz and 2400 MHz Radios Are Now Available {733T}
C6.6 Marine Generator Set Coolant Temperature Is Too High - Keel Cooling System
G3412C, G3508, G3512 and G3516 Engines Status Control Module Operation Sequence
2008/09/01 New Software Is Available {1901, 7620}
C13, C15, and C18 Tier 4 Final Engines Air Lines
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Generator Set Alignment - Check
G3412C, G3508, G3512 and G3516 Engines Status Control Module Status Control Module
3512C and 3516C Marine Auxiliary and Generator Set Engines Engine Mounts - Inspect - If Equipped
Extended Life Coolant (ELC) Exhibiting Nitrite Depletion in Machines Equipped with Aluminum Radiators {1352, 1395} Extended Life Coolant (ELC) Exhibiting Nitrite Depletion in Machines Equipped with Aluminum Radiators {1352, 1395}
2015/04/03 Recommendations for Battery Charging for Genset Usage {1401, 1406}
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Safety Messages
2008/08/25 A New Fuel Pressure Regulator Is Used {1252, 1254}
Installation of the 276-7630 Turbocharger Shield Group {1073} Installation of the 276-7630 Turbocharger Shield Group {1073}
2008/07/01 New Hose and Clamps are Now Available on Clean Gas Induction (CGI) Coolers {1061, 1087, 108C, 1380}
325D and 329D Excavators and 325D Material Handler Machine System Specifications Pressure Reducing Valve (Boom Priority)
C12 Marine Engines Configuration Parameters
C27 and C32 Engines for Caterpillar Built Machines Housing (Rear)
C18 Generator Set Engine Air Cleaner Service Indicator - Inspect
G3412C, G3508, G3512 and G3516 Engines Status Control Module Alarm Modules
C6.6 Marine Generator Set Data Link Circuit - Test
C27 and C32 Generator Set Engines Flywheel Housing