Crankshaft Pulley
Show/hide table
 | |
| Illustration 1 | g00904688 |
(1) Tighten the crankshaft pulley nut to the following torque.
- C1.5 and C2.2 ... 304 N·m (224.2 lb ft)
Caterpillar Information System:
C1.5 and C2.2 Generator Sets Flywheel Housing
C1.5 and C2.2 Generator Sets Gear Group (Front)
C1.5 and C2.2 Generator Sets Piston and Rings
C1.5 and C2.2 Generator Sets Engine Oil Pressure Switch
C1.5 and C2.2 Generator Sets Glow Plugs
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Cylinder Head
C1.5 and C2.2 Generator Sets Connecting Rod
C1.5 and C2.2 Generator Sets Main Bearing Journal
C1.5 and C2.2 Generator Sets Connecting Rod Bearing Journal
C1.5 and C2.2 Generator Sets Crankshaft
C1.5 and C2.2 Generator Sets Cylinder Block
C1.5 and C2.2 Generator Sets Water Temperature Regulator
C1.5 and C2.2 Generator Sets Alternator and Regulator
C1.5 and C2.2 Generator Sets Electric Starting Motor
C18 Generator Set Engines Sensor Supply - Test
The Orientation of the Turbocharger Coolant Hose May Cause Coolant to Leak on Some 3500B Engines{1070, 1380} The Orientation of the Turbocharger Coolant Hose May Cause Coolant to Leak on Some 3500B Engines{1070, 1380}
C6.6 Marine Generator Set Sensors and Electrical Components - MCS Switches and Alarms
PM3516 Power Modules Product Description
C18 Generator Set Engines Speed Control (Switch) - Test
C18 Generator Set Engines Speed/Timing - Test
C18 Generator Set Engines Switch Circuits - Test
3512C Engine for 785D Off-Highway Truck/Tractors Alternator and Regulator
C1.1, C1.5 and C2.2 Generator Sets General Information
C1.1, C1.5 and C2.2 Generator Sets Cooling System