Exhaust Manifold
Show/hide table
Illustration 1 | g01447958 |
Right side view of engine |
Use the following bolts to install the exhaust manifold:
- For bolt (1) through bolt (3), use M10 X 1.5-160 mm bolts.
- For bolt (4), bolt (5), bolt (7), bolt (8), bolt (9), bolt (11) and bolt (12), use M10 X 1.5-150 mm bolts.
- For bolt (6) and bolt (10), use M10 X 1.5-140 mm bolts.
- For bolt (13) and bolt (14), use M8 X 1.25-150 mm bolts.
- For bolt (15), use M8 X 1.25-140 mm bolt.
Use the following procedure to tighten the bolts of the exhaust manifold:
- Tighten the bolt (1) through bolt (15) in a numerical sequence to 4 ± 1 N·m (35 ± 9 lb in).
- Again tighten bolt (1) through bolt (12) in a numerical sequence to 55 ± 5 N·m (41 ± 4 lb ft).
- Again tighten bolt (13) through bolt (15) in a numerical sequence to 28 ± 7 N·m (21 ± 5 lb ft).
Show/hide table
Illustration 2 | g01447963 |
Rear view of engine |
(16) Torque for the four taperlock studs ... 35 ± 5 N·m (26 ± 4 lb ft)
Caterpillar Information System:
3500 Generator Set Engines Cylinder Head
C15 and C18 Petroleum Generator Sets System Pressure Release
G3600 Engines Configuration Parameters
C7 Petroleum Engines Air Inlet Elbow
C7 Petroleum Engines Air Inlet Elbow
C7 Petroleum Engines Air Inlet Elbow
C7 Petroleum Engines Air Inlet Elbow
C7 Petroleum Engines Air Inlet Elbow
3516C Generator Set Engines Fuel Filter
G3600 Engines Turbocharger Turbine Temperature Is High
G3600 Engines Temperature Ratio of Coolant to Oil Is Low
G3600 Engines Spark Plug Life Is Short
C7 Petroleum Engines Water Lines
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051} Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
C7 Petroleum Engines Crankcase Breather
C7 Engines for Caterpillar Built Machines Engine Oil Pan
3500B Engines for Caterpillar Built Power Modules Air Cleaner
3176C and 3196 Engines for Caterpillar Built Machines Engine Support (Front)
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Coolant Level Is Low
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Main Control Valve
3512 Industrial Engine Engine Speed Sensor
3500B Locomotive Engines Auxiliary Drive (Lower Left Hand)
C7 Engines for Caterpillar Built Machines Engine Oil Filter Base
C7 Petroleum Engines Engine Oil Filter Base