Coolant Level Is Low
Use this procedure in order to troubleshoot low coolant level or use this procedure if one of the following event codes is active. Refer to Troubleshooting, "Event Code List" for information about event codes and the default trip points for these codes. You must access the monitoring system on Caterpillar Electronic Technician (ET) in order to view the current trip points for these codes.
Show/hide table
Event Code | ||
Code and Description | Conditions which Generate this Code | System Response |
E2143(1) Low Engine Coolant Level | The engine coolant level has fallen below the coolant level sensor for the specified delay time. | The code is logged. |
E2143(2) Low Engine Coolant Level | The engine coolant level has fallen below the coolant level sensor for the specified delay time. | Engine power is derated. The code is logged. |
E2143(3) Low Engine Coolant Level | The engine coolant level has fallen below the coolant level sensor for the specified delay time. | The engine is shutdown. The code is logged. |
E552(1) Low Aftercooler Coolant Level Warning | The coolant level for the aftercooler has fallen below the coolant level sensor for the specified delay time. | The code is logged. |
E552(2) Low Aftercooler Coolant Level Derate | The coolant level for the aftercooler has fallen below the coolant level sensor for the specified delay time. | Engine power is derated. The code is logged. |
- Low coolant level and/or coolant leakage
- Coolant level sensor
Low Coolant Level and/or Coolant Leakage
- Inspect the coolant level. If necessary, add coolant.
- Check for the correct mixture of antifreeze and water. Refer to Operation and Maintenance Manual.
- Check the cooling system for leaks. Repair any leaks immediately.
- Check for air in the cooling system. Refer to Systems Operation/Testing and Adjusting for the correct procedure.
If an electrical problem with the coolant level sensor is suspected, refer to Troubleshooting, "Coolant Level - Test".
Caterpillar Information System:
3176C and 3196 Engines for Caterpillar Built Machines Engine Support (Front)
3500B Engines for Caterpillar Built Power Modules Air Cleaner
C7 Engines for Caterpillar Built Machines Engine Oil Pan
C7 Petroleum Engines Crankcase Breather
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051} Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
C7 Petroleum Engines Water Lines
C7 Petroleum Engines Exhaust Manifold
3500 Generator Set Engines Cylinder Head
C15 and C18 Petroleum Generator Sets System Pressure Release
G3600 Engines Configuration Parameters
C7 Petroleum Engines Air Inlet Elbow
C7 Petroleum Engines Air Inlet Elbow
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Main Control Valve
3512 Industrial Engine Engine Speed Sensor
3500B Locomotive Engines Auxiliary Drive (Lower Left Hand)
C7 Engines for Caterpillar Built Machines Engine Oil Filter Base
C7 Petroleum Engines Engine Oil Filter Base
C7 Engines for Caterpillar Built Machines Piston and Rings
C3.3 Industrial Engine Engine Oil and Filter - Change
C13, C15, and C18 Tier 4 Final Engines Alternator and Regulator
3176C, 3406E and 3456 Industrial Engines Diagnostic Capabilities
C7 Petroleum Engines Electrical System
3176C and 3196 Marine Engines Aftercooler Core - Clean/Test
C7 Petroleum Engines Electronic Unit Injector - Test