Axle (Front) - Remove and Install
Start By:
- Remove the drive shaft.
- Remove the parking brake.
- Remove the tire and rim.
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect the brake line assembly (not shown).
- The weight of front axle (1) is approximately
376 kg (830 lb) . Support front axle (1) with a suitable lifting device. Remove bolts (2) and plate (3). Repeat for the opposite side. - Remove front axle (1).
Show/hide table
Illustration 1 | g03682166 |
- Install front axle (1) in the reverse order of removal.
- Ensure the mating surface of the axle, frame, and mounting are clean and dry.
- Tighten bolts (2) to a torque of
100 ± 20 N·m (74 ± 15 lb ft) Then turn bolts (2) 180° ± 5°.
Caterpillar Information System:
D6 Track-Type Tractor Ether Starting Aid Cylinder - Replace
910M, 914M and 918M Wheel Loader Power Train Axle (Front) - Remove and Install
910M, 914M and 918M Wheel Loader Power Train Axle (Rear) - Remove and Install
2D, 2D Advanced, and 3D GRADE System for Next Gen Hydraulic Excavators Electrical Connector - Inspect
D3K2, D4K2 and D5K2 Track-Type Tractors Belts - Replace
D6 Track-Type Tractor Engine Supplement Diesel Exhaust Fluid Module - Remove and Install
The Push Frame Cover Group Has Been Improved and Now Used on Certain 631K Wheel Tractor-Scrapers {0679, 7254, 726A} The Push Frame Cover Group Has Been Improved and Now Used on Certain 631K Wheel Tractor-Scrapers {0679, 7254, 726A}
D6 Track-Type Tractor Engine Supplement Battery - Remove and Install
Procedure to Improve the Push Frame Cover Group on Certain 631KWheel Tractor-Scrapers {0679, 7254, 726A} Procedure to Improve the Push Frame Cover Group on Certain 631KWheel Tractor-Scrapers {0679, 7254, 726A}
D6 Track-Type Tractor Machine Systems Hydraulic Tank - Disassemble
D3K2, D4K2 and D5K2 Track-Type Tractors Undercarriage - Clean
A New Cylinder Liner is Now Used on Certain C18 and C32 Machine Engines {1201} A New Cylinder Liner is Now Used on Certain C18 and C32 Machine Engines {1201}
D6 Track-Type Tractor Fuel System - Prime
D6 Track-Type Tractor Undercarriage - Clean
D6 Track-Type Tractor Winch Wire Rope - Install - If Equipped
D6 Track-Type Tractor Machine Systems Hydraulic Tank - Assemble
Installation of the 567-0669 Coupler Lines Gp on Certain Wheel Loaders {5057, 5133, 6129} Installation of the 567-0669 Coupler Lines Gp on Certain Wheel Loaders {5057, 5133, 6129}
C175-16 Locomotive Engine Diesel Exhaust Fluid Pump Diaphragm - Replace
C175-16 Locomotive Engine Diesel Exhaust Fluid Pump Check Valves - Replace
C175-16 Locomotive Engine Crankshaft Vibration Damper Bolts - Inspect
C175-16 Locomotive Engine Crankshaft Vibration Damper seals - Replace
C175-16 Locomotive Engine Diesel Exhaust Fluid System - Inspect/Clean
D6 Track-Type Tractor Machine Systems Piston Pump (Steering) - Remove and Install
D8T Track-Type Tractor Differential Steering System