D6 Track-Type Tractor Caterpillar


Ether Starting Aid Cylinder - Replace

Usage:

D6 AG9

  • Nyissa ki a motor baloldali szerelőajtóját.


    Illusztráció 1g06351880
    Éteres indítás hengere

  • Az éteres indítás hengere a kengyelre van felszerelve, amely a vezetőfülke elejének közelében helyezkedik el. Lazítsa meg a szorítóbilincset. Távolítsa el a régi éterhengert a hengert az óramutató járásával ellentétes irányba forgatva azt.

  • Helyezze be az új éteres hengert. Fordítsa el a hengert az óramutató járásával megegyező irányba. Kézzel húzza meg az éteres hengert ahhoz, hogy a tömítést a hengerhez szorítsa. Feszítse meg a hengert tartó bilincset.

    Megjegyzés Az éteres hidegindító hengert a megfelelő tömítéssel együtt kell behelyezni. A tömítésnek tisztának kell lennie ahhoz, hogy megfelelően tömítsen.

  • Zárja be a motor bal oldali szerelőajtaját.
  • Caterpillar Information System:

    910M, 914M and 918M Wheel Loader Power Train Axle (Front) - Remove and Install
    910M, 914M and 918M Wheel Loader Power Train Axle (Rear) - Remove and Install
    2D, 2D Advanced, and 3D GRADE System for Next Gen Hydraulic Excavators Electrical Connector - Inspect
    D3K2, D4K2 and D5K2 Track-Type Tractors Belts - Replace
    D6 Track-Type Tractor Engine Supplement Diesel Exhaust Fluid Module - Remove and Install
    The Push Frame Cover Group Has Been Improved and Now Used on Certain 631K Wheel Tractor-Scrapers {0679, 7254, 726A} The Push Frame Cover Group Has Been Improved and Now Used on Certain 631K Wheel Tractor-Scrapers {0679, 7254, 726A}
    D6 Track-Type Tractor Engine Supplement Battery - Remove and Install
    Procedure to Improve the Push Frame Cover Group on Certain 631KWheel Tractor-Scrapers {0679, 7254, 726A} Procedure to Improve the Push Frame Cover Group on Certain 631KWheel Tractor-Scrapers {0679, 7254, 726A}
    D6 Track-Type Tractor Machine Systems Hydraulic Tank - Disassemble
    D3K2, D4K2 and D5K2 Track-Type Tractors Undercarriage - Clean
    A New Cylinder Liner is Now Used on Certain C18 and C32 Machine Engines {1201} A New Cylinder Liner is Now Used on Certain C18 and C32 Machine Engines {1201}
    D3K2, D4K2 and D5K2 Track-Type Tractors Cab Filter (Fresh Air) - Replace
    910M, 914M and 918M Wheel Loader Power Train Axle (Front) - Remove and Install
    D6 Track-Type Tractor Fuel System - Prime
    D6 Track-Type Tractor Undercarriage - Clean
    D6 Track-Type Tractor Winch Wire Rope - Install - If Equipped
    D6 Track-Type Tractor Machine Systems Hydraulic Tank - Assemble
    Installation of the 567-0669 Coupler Lines Gp on Certain Wheel Loaders {5057, 5133, 6129} Installation of the 567-0669 Coupler Lines Gp on Certain Wheel Loaders {5057, 5133, 6129}
    C175-16 Locomotive Engine Diesel Exhaust Fluid Pump Diaphragm - Replace
    C175-16 Locomotive Engine Diesel Exhaust Fluid Pump Check Valves - Replace
    C175-16 Locomotive Engine Crankshaft Vibration Damper Bolts - Inspect
    C175-16 Locomotive Engine Crankshaft Vibration Damper seals - Replace
    C175-16 Locomotive Engine Diesel Exhaust Fluid System - Inspect/Clean
    D6 Track-Type Tractor Machine Systems Piston Pump (Steering) - Remove and Install
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.