2008/04/21 Caterpillar


A New Wire Assembly is Used to Ground the Enclosure for the ECM {1901, 7556}

Usage:

G3520C CWW
Generator Set:
G3516C (S/N: GZZ1-UP)
G3520C (S/N: GZM1-UP; GZN1-UP; RLP1-UP; CWW1-UP; CWY1-UP; GDB1-UP)
Engine News SEBD9524, 24 December 2007, "A New Wire Assembly is Used to Ground the Enclosure for the ECM". Disregard this article. Refer to the following article.

Description of Change: A new ground wire is used to reduce electrical noise that is introduced into the system.

Adaptable To: The 320-9696 Wire As will provide proper grounding of the ECM enclosure. One end of the 320-9696 Wire As is attached to the bolt that secures the enclosure for the ECM to the 275-8193 Instrument Mounting Gp. This bolt must be replaced with a 2B-2694 Bolt (5/16 -18 X 2 inch). The opposite end of the wire assembly is attached to the bolt that secures the 275-8193 Instrument Mounting Gp to the engine block. Refer to Illustrations 1 and 2.




Illustration 1g01444686

(1) 2B-2694 Bolt

(2) 320-9696 Wire As




Illustration 2g01444703

Attach the ground wire at the locations that are indicated by the arrows.

The new ground wire should be installed on all the generator set engines that are listed in Table 1.

Note: The ground wire assembly can be fabricated by using a 520 mm (20.5 inch) length of 12 gauge wire. Install a 8.77 mm (0.3453 inch) ring terminal to one end of the wire. Install a 13.08 mm (0.5150 inch) ring terminal to the opposite end of the wire.

Table 1
Model     Serial Number    
G3516C     S/N:GZZ00193    
G3516C     S/N:GZZ00196    
G3516C     S/N:GZZ00198    
G3516C     S/N:GZZ00200    
G3516C     S/N:GZZ00203    
G3516C     S/N:GZZ00207    
G3520C     S/N:GZM00143-00148    
G3520C     S/N:GZN00240    
G3520C     S/N:GZN00247-00248    
G3520C     S/N:GZN00272-00278    
G3520C     S/N:GZN00280    
G3520C     S/N:GZN00283    
G3520C     S/N:GZN00285    
G3520C     S/N:GZN00288    
G3520C     S/N:GZN00292-00293    
G3520C     S/N:GZN00296    
G3520C     S/N:GZN00298    
G3520C     S/N:GZN00301    
G3520C     S/N:GZN00304    
G3520C     S/N:GZN00307-00310    
G3520C     S/N:GZN00312    
G3520C     S/N:GZN00315    
G3520C     S/N:GZN00317    
G3520C     S/N:GZN00321-00322    
G3520C     S/N:GZN00324    
G3520C     S/N:GZN00326    
G3520C     S/N:GZN00329-00330    
G3520C     S/N:GZN00334-00336    
G3520C     S/N:GZN00338    
G3520C     S/N:GZN00340    
G3520C     S/N:GZN00342    
G3520C     S/N:GZN00344    
G3520C     S/N:GZN00346    
G3520C     S/N:GZN00348    
G3520C     S/N:GZN00350    
G3520C     S/N:GZN00353    
G3520C     S/N:GZN00355    
G3520C     S/N:GZN00357    
G3520C     S/N:GZN00360    
G3520C     S/N:GZN00362    
G3520C     S/N:GZN00364-00365    
G3520C     S/N:GZN00367    
G3520C     S/N:GZN00369-00378    
G3520C     S/N:GZN00381    
G3520C     S/N:GZN00383    
G3520C     S/N:GZN00409-00415    
G3520C     S/N:GZN00435-00437    
G3520C     S/N:GZN00439-00441    
G3520C     S/N:GZN00450    
G3520C     S/N:GZN00456-00474    
G3520C     S/N:RLP00150-00180    
G3520C     S/N:CWW00261    
G3520C     S/N:CWY00219-00221    
G3520C     S/N:GDB00039-00041    
G3520C     S/N:GDB00045    

Caterpillar Information System:

Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Alarm Module Control (Custom)
2007/12/24 Oil Suction Tube {1302}
3500B Locomotive Engines Belt Tension Chart
3516C Generator Set Engine Speed/Timing - Test
C7 and C9 On-Highway Engines Solenoid Valve - Test
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Injector Solenoid - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Alarm Modules
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module CAN Data Link - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Programmable Kilowatt Level Output
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Programmable Spare Output
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Programmable Spare Relay Outputs
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Diagnostic Codes
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Cat Data Link - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Customer Interface Module
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) System Communication Module (Customer)
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) EMCP Electronic Control (AC Transformer Box) - Replace
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) EMCP Electronic Control (Bus Transformer Box) - Replace
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Relay Module - Replace
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) EMCP Electronic Control (Generator Set) - Replace
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Schematics and Wiring Diagrams
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Symbols
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) EMCP Electronic Control (Generator Set) - Flash Program
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Typical Generator Abbreviations
C7 Petroleum Engine Fumes Disposal Filter Element - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.