Make sure that all the safety messages are legible. Clean the safety messages or replace the safety messages if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the safety messages, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the safety messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety message. Loose adhesive will allow the safety message to fall.
Replace any safety message that is damaged, or missing. If a safety message is attached to a part that is replaced, install a safety message on the replacement part. Any Caterpillar dealer can provide new safety messages.
| |
| Illustration 1 | g06314184 |
| |
| Illustration 2 | g06314181 |
These warning messages are on top of the fork carriage.
| |
| Illustration 3 | g01381064 |
 |
|
No clearance for person in this area during operation. Severe injury or death from impalement could occur. Stay away from the work tool while it is in operation. |