14L Motor Grader Machine Systems Caterpillar


Wheel Mounting - AWD

Usage:

14L B94


Illustration 1g03590309

Table 1
Specification for 250-2002 Wheel Mounting Gp 
Item  Qty  Part  Specification Description 
56  7X-2575 Bolt  Use any one of the following torque to tighten the bolt:

Tighten the bolt to 900 ± 100 N·m (664 ± 74 lb ft).

or

1. Tighten the bolt to 400 ± 5 N·m (295 ± 4 lb ft).
2. Tighten bolts to an additional turn of 30 ± 1 degrees. 

Caterpillar Information System:

Troubleshooting Acceleration Issues on Caterpillar On-highway Truck Engines That Are Equipped with Automatic Transmissions {1000, 3030} Troubleshooting Acceleration Issues on Caterpillar On-highway Truck Engines That Are Equipped with Automatic Transmissions {1000, 3030}
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Data Link
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Instrument Panel
Installation of the Heated Nozzle for the Caterpillar Regeneration System (CRS){107P, 108B, 1408, 1743, 1803, 1901, 7620} Installation of the Heated Nozzle for the Caterpillar Regeneration System (CRS){107P, 108B, 1408, 1743, 1803, 1901, 7620}
C15 Petroleum Generator Set Engines Camshaft
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) EMCP Electronic Control (Generator Set)
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) General Information
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Engine Control Switch - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0248 - FMI 09
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0110 - FMI 02
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0100 - FMI 02
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Fault Identification
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Sensors
C9 Petroleum Engines Aftercooler - Install
3516C Generator Set Engine CAN Data Link - Test
Problem with Monitoring of the Turbocharger Inlet Temperature for some G3500 A3 Engines{1052, 1408, 7610, 7620} Problem with Monitoring of the Turbocharger Inlet Temperature for some G3500 A3 Engines{1052, 1408, 7610, 7620}
G3600 Engines Speed/Timing - Test
C7 Petroleum Engine Diagnostic Flash Code Retrieval
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Modes Of Operation
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Alarm Mode
C175-16 Locomotive Engine Connecting Rod and Main Bearing Journals - Type 1
3516C Generator Set Engine Cat Data Link - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Shutdown Mode
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Paralleling Mode
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.