Camshaft
Show/hide table
 | |
| Illustration 1 | g01524322 |
(A) Diameter of the camshaft journals ... 65.126 ± 0.013 mm (2.5640 ± 0.0005 inch)
Show/hide table
 | |
| Illustration 2 | g01524323 |
(B) Specified camshaft lobe lift
- Exhaust lobe ... 7.707 mm (0.3034 inch)
- Inlet lobe ... 7.970 mm (0.3138 inch)
Use the following procedure in order to determine the actual lobe lift:
- Measure the camshaft lobe height (C) .
- Measure the base circle (D) .
- Subtract the base circle (D) from the camshaft lobe height (C). The difference is the actual camshaft lobe lift (B) .
Maximum permissible difference between actual lobe lift and the specified lobe lift of a new camshaft ... ± 0.10 mm (0.004 inch)
Caterpillar Information System:
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) EMCP Electronic Control (Generator Set)
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) General Information
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Engine Control Switch - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0248 - FMI 09
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0110 - FMI 02
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0100 - FMI 02
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Fault Identification
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Service Tools
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) General Information
C175-16 and C175-20 Generator Set Engines Coolant Pressure Is Low
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Indicator for Low Coolant Level
G3500 Generator Sets Configuration Parameters
Installation of the Heated Nozzle for the Caterpillar Regeneration System (CRS){107P, 108B, 1408, 1743, 1803, 1901, 7620} Installation of the Heated Nozzle for the Caterpillar Regeneration System (CRS){107P, 108B, 1408, 1743, 1803, 1901, 7620}
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Instrument Panel
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Data Link
Troubleshooting Acceleration Issues on Caterpillar On-highway Truck Engines That Are Equipped with Automatic Transmissions {1000, 3030} Troubleshooting Acceleration Issues on Caterpillar On-highway Truck Engines That Are Equipped with Automatic Transmissions {1000, 3030}
14L Motor Grader Machine Systems Wheel Mounting - AWD
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Sensors
C9 Petroleum Engines Aftercooler - Install
3516C Generator Set Engine CAN Data Link - Test
Problem with Monitoring of the Turbocharger Inlet Temperature for some G3500 A3 Engines{1052, 1408, 7610, 7620} Problem with Monitoring of the Turbocharger Inlet Temperature for some G3500 A3 Engines{1052, 1408, 7610, 7620}
G3600 Engines Speed/Timing - Test
C7 Petroleum Engine Diagnostic Flash Code Retrieval
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Modes Of Operation