Indicator for Low Oil Pressure
Test Step 1.
ReferenceThe engine Electronic Control Module (ECM) monitors the oil pressure on C32 engines. The Electronic Control System (ECS) for the engine sends the information to the GSC+P. For troubleshooting, refer to System Operation Testing and Adjusting, RENR9968 or Troubleshooting, RENR9348.
Results:
- - STOP
Caterpillar Information System:
3516C Generator Set Engine Event Codes
3516C Generator Set Engine Diagnostic Trouble Codes
345D, 349D and 349D2 Excavator Machine System Specifications Check Valve (Boom Drift Reduction)
345C Excavator Machine System Specifications Boom Lines
3500 Industrial Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
3500 Engines with EUI Option Engine Coolant Temperature Sensor
G3600 Engines Cylinder Firing Signal - Test
G3600 Engines Control Module - Replace - ICSM
C175-16 and C175-20 Generator Set Engines Intake Manifold Air Pressure Is High
2007/12/17 An Improved Start/Stop Control is Now Used on Marine Applications {7418}
2007/12/10 Installation of Fuel Injection Pump {1251}
3500 Engines Turbocharger
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Engine Does Not Shutdown
2008/03/01 A New Turbocharger is Now Used on Certain On-Highway Engines {1052, 1053}
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Speed/Timing Sensor
C15 Petroleum Generator Set Engines Turbocharger
3508B Engine for Caterpillar Built Machines Crankcase Breather
G3500 Generator Sets Engine Oil Filter - Change
C175-16 Locomotive Engine Electric Starting Motor
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Sensor Signal (Analog, Passive) - Test
2007/12/01 A New Internal Wiring Harness for the Injectors is Now Used {1120, 1408}
G3612 and G3616 Engines Prechamber Ignition Body - Install
G3600 Engines Speed Control (Switch) - Test
2008/02/25 A New Plug and O-ring Are Now Used on the Cylinder Head {1100}