Parallel Setpoint Viewing OP2-3
OP2-3 is the option for Parallel Setpoint Viewing. The Parallel setpoints define various parameters that allow precise frequency and phase matching. The setpoints from P301 to P314 are programmable. For a description of these setpoints, see Testing And Adjusting, "Parallel Setpoint Programming OP5-3".
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Remove
C18 Petroleum Generator Sets Instrument Panel - Inspect
3176C, 3406E and 3456 Industrial Engines Diagnostic Code Cross Reference
C9 Petroleum Engines Front Cover - Remove and Install
3176C, 3406E and 3456 Industrial Engines Engine Overspeeds
C4.4 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
3176C, 3406E and 3456 Industrial Engines Coolant Level - Test
C13, C15, and C18 Tier 4 Final Engines Air Lines
3176C, 3406E and 3456 Industrial Engines Indicator Lamp - Test
3176C, 3406E and 3456 Industrial Engines Electronic Service Tool Does Not Communicate
C9 Petroleum Engines Flywheel Housing - Remove and Install
C15 and C18 Petroleum Generator Sets Overhaul (Top End)
C9 Petroleum Engines Gear Group (Front) - Remove
C9 Petroleum Engines Gear Group (Front) - Install
2007/11/26 Improved PL1000E Hardware and Software is Now Available {7610}
3516B Engine for 994F and 994H Wheel Loaders Coolant Contains Oil
3176C, 3406E and 3456 Industrial Engines ECM Does Not Communicate with Other Modules
G3520B Industrial Engines Event Codes
G3520B Industrial Engines Diagnostic Trouble Codes
C4.4 Generator Set Engines Injector Data Incorrect - Test
C3.3 Industrial Engine Model View Illustrations
2007/12/03 Improved PL1000T Hardware and Software is Now Available {7610}
C9 Petroleum Engines Housing (Front) - Remove
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission and Torque Converter - Separate