AD 22 Underground Articulated Truck Hydraulic System Caterpillar


Ejector Body

Usage:

AD22 MW5


Illustration 1g06332381

Table 1
Specification for 526-6517 Ejector Body Gp 
Item  Quantity  Part  Specification Description 
531-1741 Plate  Wear plate (1) must be replaced when thickness is less than 4.0 mm (0.157 inch)
531-1440 Plate  Wear plate (2) must be replaced when thickness is less than 4.0 mm (0.157 inch)
Note: Failure to replace wear plates at this stage of wear may result in premature wear of ejector cylinders. 
Note: All the ejector body wear plates should be replaced when the plate is worn to within 4.0 mm (0.157 inch) of the parent metal. 
531-1438 Plate  The gap tolerance between plate (3), and plate (4), should be maintained at 9.5 ± 3.0 mm (0.374 ± 0.118 inch)
531-1748 Plate  The gap tolerance between plate (4), and plate (3), should be maintained at 9.5 ± 3.0 mm (0.374 ± 0.118 inch)
531-1745 Plate  Plate (5), functions as a wiper. Standard thickness is 16.0 mm (0.630 inch)
Ensure that no material build up around plate (5).
531-1748 Plate  The gap tolerance between plate (6), and plate (7), should be maintained at 4.0 ± 1.5 mm (0.157 ± 0.060 inch)
531-1748 Plate  The gap tolerance between plate (7), and plate (6), should be maintained at 4.0 ± 1.5 mm (0.157 ± 0.060 inch)
Note: Ensure no material to accumulate in the areas between moving sections. Failure to maintain may lead to premature wear to ejector body. 

Caterpillar Information System:

631K OEM Wheel Tractor Machine Systems Service Brake System Pressure - Test
854K Wheel Dozer Oil Filter (Steering, Brake Cooler)
854K Wheel Dozer Gear Pump (Steering, Brake Oil Cooler)
Improved Parts are Now Used in the Differential Lock on Certain Compact Wheel Loaders {3258, 3278} Improved Parts are Now Used in the Differential Lock on Certain Compact Wheel Loaders {3258, 3278}
631K OEM Wheel Tractor Machine Systems Relief Valve (Steering Cylinder Crossover) - Test and Adjust
973K Track-Type Loader Machine Systems Fuel Tank - Remove and Install
Improved Plates Are Now Used on the Rear Frame Boom Cylinder Mounting Lugs on Certain D-Series Wheel Skidders {7051} Improved Plates Are Now Used on the Rear Frame Boom Cylinder Mounting Lugs on Certain D-Series Wheel Skidders {7051}
631K OEM Wheel Tractor Machine Systems Steering System Pressure - Test and Adjust
854K Wheel Dozer Steering Pilot System
631K OEM Wheel Tractor Machine Systems Hydraulic Cylinder Cycle Time - Check
C32 Marine Engines Engine Oil Cooler - Remove
994K Wheel Loader Engine Valve Lash and Bridge - Check
Regulatory Compliance Information Wireless Device - Cat ® Bluetooth FOB (A1S1) - If Equipped
320, 323 Excavator Engine Supplement Engine - Remove and Install
Regulatory Compliance Information Wireless Device - Cat ® Bluetooth NT (A5S4) - If Equipped
631K OEM Wheel Tractor Machine Systems Brake System Air - Purge
C32 Marine Engines Water Pump - Remove
D6 Track-Type Tractor Safety Messages
994K Wheel Loader Monitoring System
631K OEM Wheel Tractor Machine Systems Brake Accumulator (Service) - Test and Charge
D6 Track-Type Tractor Additional Messages
MD6250 Rotary Drill Systems Engine Performance - Test - Engine Speed
631K OEM Wheel Tractor Machine Systems Brake Accumulator Charging Valve - Test
631K OEM Wheel Tractor Machine Systems Gear Pump (Brake Cooling) - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.