Oscillating Hitch - Lubricate
Show/hide table
 |
|
Crushing Hazard. Ensure that the engine start switch is in the OFF position, and that the parking brake is engaged before entering the articulation area. Failure to do so could result in serious injury or death. |
Show/hide table
| NOTICE |
|---|
|
Check that the lines attached to all the remote grease fittings are undamaged. If the grease lines are split, grease will not reach the components that require lubricating. Machine damage will result. |
If regular lubrication is carried out at the recommended interval. The fittings for the articulating hitch bearings should only take one or two shots of grease. As many as 20 shots of grease, may be used to lubricate the bearings for the oscillating hitch.
Wipe off the fittings before any lubricant is applied.
Show/hide table
| |
| Illustration 1 | g06081358 |
- Apply lubricant through one fitting for the upper hitch bearing.
Show/hide table
Illustration 2 g06081359 - Apply lubricant through one fitting for the lower hitch bearing.
Show/hide table
Illustration 3 g06153278 Show/hide table
Illustration 4 g06153271 - Apply lubricant through remote mounted fitting (3) for the rear oscillation bearing.
- Apply lubricant through remote mounted fitting (4) for the front oscillation bearing.
Caterpillar Information System:
994K Wheel Loader Machine Systems Seat - Remove and Install
AD22 Underground Articulated Truck Oscillating Hitch - Adjust
A New Valve Mechanism Cover and Elbows Are Now Used on Certain 3412, C27, and C32 Machine Engines {1107} A New Valve Mechanism Cover and Elbows Are Now Used on Certain 3412, C27, and C32 Machine Engines {1107}
MD6310 Rotary Drill Air Compressor Oil Filter - Change
MD6310 Rotary Drill Air Compressor Oil - Change
950 GC Wheel Loader Power Train Transmission Oil Cooler
926M, 930M and 938M Wheel Loaders Cooling System Coolant Extender (ELC) - Add
950 GC Wheel Loader Power Train Transmission Oil Pump
An Installation Procedure for the TLV2 Seat Suspension Harness is Now Available {1408, 7324} An Installation Procedure for the TLV2 Seat Suspension Harness is Now Available {1408, 7324}
C7.1 Engines and Generator Sets Exhaust Has Excessive White Smoke
980L Tier 3 Wheel Loader Machine System Piston Pump (Brake, Pilot, Fan) - Disassemble
C7.1 Engines and Generator Sets Exhaust Has Excessive Black Smoke
992K Wheel Loader Systems Piston Pump (Implement, RH)
980M Tier 4 and 982M Tier 4 Wheel Loader Engine Supplement Engine Oil Cooler - Remove and Install
C7.1 Engines and Generator Sets Exhaust System Contains Coolant
980L Tier 3 Wheel Loader Engine Supplement Engine Oil Cooler - Remove and Install
992K Wheel Loader Systems Pressure Switch (Steering Cooler Filter Bypass) (Steering Pump Case Drain Filter Bypass)
C7.1 Engines and Generator Sets Exhaust System Contains Fuel
980L Tier 3 Wheel Loader Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
C7.1 Engines and Generator Sets Exhaust System Contains Oil
980L Tier 3 Wheel Loader Machine System Piston Pump (Implement) - Remove and Install
C7.1 Engines and Generator Sets Fuel Consumption Is Excessive
C7.1 Engines and Generator Sets Fuel Contains Water
C7.1 Engines and Generator Sets Fuel Rail Pressure Problem