Piston Pump (Implement) - Remove and Install
Start By:
- Remove the hydraulic tank.
- Remove the transmission oil pump.
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect hose assemblies (2) and (3) from implement pump (1).
Show/hide table
Illustration 2 g06128761 View from right side of the implement pump with the machine frame not shown. - Disconnect hose assemblies (4) and (5). Remove manifold (6).
Show/hide table
Illustration 3 g06128768 - Attach a suitable lifting device to implement pump (1). The weight of implement pump (1) is approximately
99 kg (218 lb) . - Disconnect bolts (7) and (8) from implement pump (1).
Show/hide table
Illustration 4 g06128773 - Remove implement pump (1) and O-ring seal (9).
Show/hide table
Illustration 1 | g06128739 |
- Install implement pump (1) in the reverse order of the removal.
Caterpillar Information System:
C7.1 Engines and Generator Sets Exhaust System Contains Oil
980L Tier 3 Wheel Loader Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
C7.1 Engines and Generator Sets Exhaust System Contains Fuel
992K Wheel Loader Systems Pressure Switch (Steering Cooler Filter Bypass) (Steering Pump Case Drain Filter Bypass)
980L Tier 3 Wheel Loader Engine Supplement Engine Oil Cooler - Remove and Install
C7.1 Engines and Generator Sets Exhaust System Contains Coolant
980M Tier 4 and 982M Tier 4 Wheel Loader Engine Supplement Engine Oil Cooler - Remove and Install
992K Wheel Loader Systems Piston Pump (Implement, RH)
AD22 Underground Articulated Truck Oscillating Hitch - Lubricate
994K Wheel Loader Machine Systems Seat - Remove and Install
AD22 Underground Articulated Truck Oscillating Hitch - Adjust
A New Valve Mechanism Cover and Elbows Are Now Used on Certain 3412, C27, and C32 Machine Engines {1107} A New Valve Mechanism Cover and Elbows Are Now Used on Certain 3412, C27, and C32 Machine Engines {1107}
C7.1 Engines and Generator Sets Fuel Consumption Is Excessive
C7.1 Engines and Generator Sets Fuel Contains Water
C7.1 Engines and Generator Sets Fuel Rail Pressure Problem
C7.1 Engines and Generator Sets Fuel Temperature Is High
980L Tier 3 Wheel Loader Machine System Piston Pump (Implement) - Disassemble
C7.1 Engines and Generator Sets Inlet Air Is Restricted
MD6250 Rotary Drill Air Filter Elements - Clean/Replace
980L Tier 3 Wheel Loader Engine Supplement Expansion Tank - Remove and Install
C7.1 Engines and Generator Sets Intake Manifold Air Pressure Is High
C7.1 Engines and Generator Sets Intake Manifold Air Pressure Is Low
C7.1 Engines and Generator Sets Intake Manifold Air Temperature Is High
A New Piston Pump Group for the Winch Is Now Used on Certain Wheel Skidders {5070, 5179} A New Piston Pump Group for the Winch Is Now Used on Certain Wheel Skidders {5070, 5179}