Expansion Tank - Remove and Install
- Open the hood.
Show/hide table
Illustration 1 g06129193 Note: Note the orientation of the clamps for installation purposes.
- Loosen clamp (1) and disconnect hose (3).
- Loosen clamps (2) and disconnect hoses (4).
Show/hide table
Illustration 2 g06129194 - Loosen clamp (6) and disconnect hose (8).
- Remove bolts (7) and expansion tank (5).
- Install expansion tank (5) in the reverse order of removal.
- Tighten bolts (7) to a torque of
30 ± 7 N·m (22 ± 5 lb ft) . - Tighten clamps (2) to a torque of
7.5 ± 1 N·m (66 ± 9 lb in) . - Tighten clamp (1) to a torque of
0.9 ± 0.2 N·m (8.0 ± 1.8 lb in) .
- Tighten bolts (7) to a torque of
Caterpillar Information System:
MD6250 Rotary Drill Air Filter Elements - Clean/Replace
C7.1 Engines and Generator Sets Inlet Air Is Restricted
980L Tier 3 Wheel Loader Machine System Piston Pump (Implement) - Disassemble
C7.1 Engines and Generator Sets Fuel Temperature Is High
C7.1 Engines and Generator Sets Fuel Rail Pressure Problem
C7.1 Engines and Generator Sets Fuel Contains Water
C7.1 Engines and Generator Sets Fuel Consumption Is Excessive
980L Tier 3 Wheel Loader Machine System Piston Pump (Implement) - Remove and Install
C7.1 Engines and Generator Sets Exhaust System Contains Oil
980L Tier 3 Wheel Loader Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
C7.1 Engines and Generator Sets Exhaust System Contains Fuel
992K Wheel Loader Systems Pressure Switch (Steering Cooler Filter Bypass) (Steering Pump Case Drain Filter Bypass)
C7.1 Engines and Generator Sets Intake Manifold Air Pressure Is High
C7.1 Engines and Generator Sets Intake Manifold Air Pressure Is Low
C7.1 Engines and Generator Sets Intake Manifold Air Temperature Is High
A New Piston Pump Group for the Winch Is Now Used on Certain Wheel Skidders {5070, 5179} A New Piston Pump Group for the Winch Is Now Used on Certain Wheel Skidders {5070, 5179}
994K Wheel Loader Power Train Pump Drive (Front) - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Tilt Lever and Tilt Link - Remove and Install
D6T Track-Type Tractor Electrohydraulic System ROPS Flood Lamps Do Not Activate
525D, 535D, 545D and 555D Wheel Skidders C7.1 Engine Supplement Piston Motor (Fan) - Disassemble
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Steering Control
MD6200 Rotary Drill Automatic Lubrication Grease Tank - Fill
525D, 535D, 545D and 555D Wheel Skidders C7.1 Engine Supplement Piston Motor (Fan) - Assemble
MD6200 Rotary Drill Camera - Clean