Track Link Assembly has been Discontinued on Certain D10 Track Type Tractors {4169, 4171} Caterpillar


Track Link Assembly has been Discontinued on Certain D10 Track Type Tractors {4169, 4171}

Usage:

D10N 2YD
Track-Type Tractor
D10N (S/N: 2YD1-UP; 3SK1-UP)
D10R (S/N: 3KR1-UP; AKT1-UP)
D10T (S/N: RJG1-UP)
D10T2 (S/N: RAB1-UP; JJW1-UP)

Reference: Refer to Service Magazine , SEPD1963 , "A New Undercarriage System Is Now Available For Certain D10 Track-Type Tractors".

The Scallop Resistant Link (SRL) link assembly and track groups have been discontinued and service replaced with the 463-9336 Track Link As, which contains Dura Link track links. The Dura Link track link has a convex profiled rail that provides additional wear benefits over the previous SRL track.



Illustration 1g06128117
(1) 463-9336 Track Link As
(2) 433-6739 Sprocket Segment

Table 1
Item  New Part No  Description 
463-9336  Track Link As 
433-6739  Sprocket Segment 

New 463-9336 Track Link As (1) is a direct replacement for the former 398-5234 Track Link As (SRL).

New 433-6739 Sprocket Segment (2) replaces former 278-2374 Segment and must be used with the 463-9336 Track Link As. The 463-9336 Track Link As contains a larger track bushing which is not compatible with the former. It is recommended that single flange rollers ( 309-7679 Track Roller Gp or 421-8434 Track Roller Gp) be used with the Dura Link Link Assemblies and Track Groups.

New track link assembly and new sprocket segment are adaptable to the products within the listed serial numbers.

New track group replaces former track group as listed in Table 2:

Table 2
Former Part No (SRL)  New Part No  Shoe Type  Shoe Width 
398-5262  495-3882  Super Extreme Service  610 mm (24 inch) 
398-5264  495-3882  Super Extreme Service  610 mm (24 inch) 
398-5274  495-3884  Super Extreme Service (ARM)  610 mm (24 inch) 
398-5266  495-3886  Super Extreme Service (Round Center Hole)  610 mm (24 inch) 
398-5268  495-3888  Super Extreme Service  710 mm (28 inch) 
398-5235  495-3888  Super Extreme service  710 mm (28 inch) 
398-5270  495-3888  Super Extreme Service  710 mm (28 inch) 
398-5272  495-3890  Super Extreme Service (Round Center Hole)  710 mm (28 inch) 

Caterpillar Information System:

953K Track-Type Loader Machine Systems General Information (Fan Hydraulic System)
Procedure to Install Tie-off Retrofit on Certain 990H, 990K Wheel Loaders and 844H, 844K Wheel Dozers {0679, 1122, 7323} Procedure to Install Tie-off Retrofit on Certain 990H, 990K Wheel Loaders and 844H, 844K Wheel Dozers {0679, 1122, 7323}
953K Track-Type Loader Machine Systems Brake System
C7.1 Engines and Generator Sets ARD Is Disabled
992K Wheel Loader Systems Brake Accumulator - Charged
A New Heavy-Duty Fender Package is Now Available for Certain 621H, 621K, 623H, 623K, 627H, and 627K Wheel Tractor-Scrapers {7252} A New Heavy-Duty Fender Package is Now Available for Certain 621H, 621K, 623H, 623K, 627H, and 627K Wheel Tractor-Scrapers {7252}
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Hydraulic Cylinder - Remove and Install - Quick Coupler S60-S70
Procedure to Install the Heavy-Duty Fender Group on Certain 621, 623, and 627 H and K Series Wheel Tractor-Scrapers {7252} Procedure to Install the Heavy-Duty Fender Group on Certain 621, 623, and 627 H and K Series Wheel Tractor-Scrapers {7252}
992K Wheel Loader Systems Differential and Bevel Gear
C7.1 Engines and Generator Sets ARD Fuel Pressure Is Low
992K Wheel Loader Systems Differential and Bevel Gear
980L Tier 3 Wheel Loader Engine Supplement Exhaust Manifold - Remove and Install
953K Track-Type Loader Machine Systems Location of Components (Fan Hydraulic System)
953K Track-Type Loader Machine Systems Electronic Control (Fan Hydraulic System)
525D, 535D, 545D and 555D Wheel Skidders C7.1 Engine Supplement Crankshaft Front Seal - Remove and Install
953K Track-Type Loader Machine Systems General Information (Power Train System)
953K Track-Type Loader Machine Systems Location of Components (Power Train System)
953K Track-Type Loader Machine Systems Electronic Control (Power Train System)
D6N Track-Type Tractor Machine Systems Hydraulic Control Valve - Disassemble
Slope Assist Setup and Calibration on Certain D3K2, D4K2, D5K2, D6K, and D6K2 Track-Type Tractors {1408, 7220} Slope Assist Setup and Calibration on Certain D3K2, D4K2, D5K2, D6K, and D6K2 Track-Type Tractors {1408, 7220}
953K Track-Type Loader Machine Systems General Information (Undercarriage)
953K Track-Type Loader Machine Systems Location of Components (Undercarriage)
953K Track-Type Loader Machine Systems Track Roller Frame
953K Track-Type Loader Machine Systems Equalizer Bar
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.