PL61 Pipelayer Caterpillar


Engine Oil Sample - Obtain

Usage:

PL61 6P2


图 1g06042980

  • 拆下两个螺栓,并打开左侧发动机检修门正下方的检修面板。 参考操作和保养手册, "一般危险事项"中关于盛放溢出液体的信息。


    图 2g03323023

  • 取得定期油样。 机油取样口位于发动机滤清器底座上。

    1. 使用机油取样阀 (1)。 参考专门出版物, PEHP6001, "如何获取好的油样"。

  • 安装两个螺栓,并关闭机器左侧的下部检修门。

    参考: 请参阅专门出版物, SEBU6250, "Caterpillar 油液和建议", "S·O·S 机油分析"和“取样间隔和取样阀位置”,以了解更多信息。

  • Caterpillar Information System:

    PL61 Pipelayer Engine Oil Level - Check
    D6T Track Type Tractor Power Train Main Drive Shaft - Remove and Install
    Using a SATEL® Satelline-EASy UHF Radio Modem to Connect a Cat® AccuGrade Grade Control System or Cat® GRADE Machine to a Topcon® base station {7220, 7490} Using a SATEL® Satelline-EASy UHF Radio Modem to Connect a Cat® AccuGrade Grade Control System or Cat® GRADE Machine to a Topcon® base station {7220, 7490}
    PL61 Pipelayer Engine Air Filter Secondary Element - Replace
    PL61 Pipelayer Engine Air Filter Primary Element - Clean/Replace
    994K Wheel Loader Machine Systems Brake Control Valve (Service) - Remove and Install
    953K Track-Type Loader Machine Systems Piston Pump Neutral - Test and Adjust
    953K Track-Type Loader Machine Systems Crossover Relief Valve - Test and Adjust - Hydrostatic Stall
    953K Track-Type Loader Machine Systems Charge Relief Valve - Test and Adjust
    953K Track-Type Loader Machine Systems Piston Pump and Motor Maximum Displacement - Test
    953K Track-Type Loader Machine Systems Steering - Test - Joystick Steering (S-Steer Configuration)
    953K Track-Type Loader Machine Systems Steering - Test - Pedal Steering Configuration
    PL61 Pipelayer Engine Oil and Filter - Change
    953K Track-Type Loader Machine Systems Power Train System
    D5R and D6N Track-Type Tractor Engine Supplement Hood - Remove and Install
    312F and 313F Excavator Machine Systems Pilot Valve (Swing Parking Brake)
    992K Wheel Loader Systems Brake Accumulator - Uncharged
    980L Tier 3 Wheel Loader Engine Supplement Exhaust Manifold - Remove and Install
    992K Wheel Loader Systems Differential and Bevel Gear
    C7.1 Engines and Generator Sets ARD Fuel Pressure Is Low
    992K Wheel Loader Systems Differential and Bevel Gear
    Procedure to Install the Heavy-Duty Fender Group on Certain 621, 623, and 627 H and K Series Wheel Tractor-Scrapers {7252} Procedure to Install the Heavy-Duty Fender Group on Certain 621, 623, and 627 H and K Series Wheel Tractor-Scrapers {7252}
    TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Hydraulic Cylinder - Remove and Install - Quick Coupler S60-S70
    A New Heavy-Duty Fender Package is Now Available for Certain 621H, 621K, 623H, 623K, 627H, and 627K Wheel Tractor-Scrapers {7252} A New Heavy-Duty Fender Package is Now Available for Certain 621H, 621K, 623H, 623K, 627H, and 627K Wheel Tractor-Scrapers {7252}
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.