Caterpillar products such as engines, transmissions, and major attachments are identified by Serial Numbers (S/N).
For quick reference, record the identification numbers in the spaces that are provided below the illustrations.
Illustration 1 | g02161131 |
The Product Identification Number (PIN) for the machine is on the left-hand side of the tractor. PIN plate (1) is below the operator compartment. Plate (1) will have the following information:
Illustration 2 | g02436556 |
Model number (A)____________________
Product Identification Number (B)____________________
Service Information Plate (C)____________________
Month and Year of Manufacture Plate (If Required) (D)____________________
CE Plate (If Required) (E)____________________
Country of Origin Info Plate (If Required) (F)____________________
Local regulation may require documentation of the month and/or year of manufacture in the Operation and Maintenance Manual. Enter on line (D) above if required.
Illustration 3 | g03477118 |
Serial number plate for the transmission for the tractor is on the back side of the transmission.
Transmission serial number____________________
Transmission arrangement number____________________
Torque converter serial number____________________
Illustration 4 | g02125688 |
Serial number plate for the transmission for the scraper can be found on the back of the transmission.
Transmission serial number____________________
Transmission arrangement number____________________
Torque converter serial number____________________
Illustration 5 | g03477121 |
Serial number plate for the engine can be found on top of the engine.
Engine model number____________________
Engine serial number____________________
Engine arrangement number____________________
Illustration 6 | g02722445 |
Serial number plate for the engine of the scraper can be found on top of the engine.
Engine serial number____________________
Engine model number____________________
Engine arrangement number____________________
This message is positioned on the ROPS.
Illustration 7 | g03694619 |
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification. |
This machine has been certified to the standards that are listed on the certification film. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification film.
Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information.
Illustration 8 | g02162815 |
This plate is positioned on the bottom left side of plate (1) for the PIN.
Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.
For machines compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
- Engine Power Primary Engine (kW)____________________
- Engine Power for Additional Engine (If Equipped) ____________________
- Typical Machine Operating Weight for European Market (kg)____________________
- Year of Construction____________________
- Machine Type ____________________
For the name and address of the manufacturer, and the country of origin of the machine, refer to the PIN plate.
Note: This label is on machines that are going into Canada.
Illustration 9 | g06063443 |
If equipped, this label is located below to the PIN plate. This label verifies that the product meets the requirements of ICES-002 Issue 6. Compliance to ICES-002 Issue 6 is accomplished by meeting electromagnetic emissions industry standard CISPR-12.
If equipped, this message is used to verify the certification of the Product Link as an RF transmitter. The following specifications are provided to aid in ensuring compliance with all local regulations:
Operating frequency range | 148 to 150 MHz |
Transmitter power | 5-10 w |
This message is on the control group for the Product Link. The control group is on the top of the cab.
Illustration 10 | g01261742 |
This machine is equipped with a Caterpillar Product Link communication device. When electric detonators are used, this communication device should be deactivated within In cases where the type of Product Link module cannot be identified, Caterpillar recommends that the device be disabled no less than |
If the machine is required to work within
Consult your Caterpillar dealer with any questions that concern the operation of the Product Link in a specific country.
For machines compliant to the Eurasian Economic Union requirements, the EAC mark plate is positioned near the Product Identification Number (PIN) plate (see Product Information Section of the machine Operation and Maintenance Manual). The EAC mark plate is placed on machines certified to the Eurasian Economic Union requirements effective at the time of market entry.
Illustration 11 | g06094564 |
The Month and Year of Manufacture are on the PIN plate.
Manufacturer:
Caterpillar Inc.,100 N.E. Adams Street
Peoria, Illinois 61629, USA
Entity authorized by the manufacturer at the territory of Eurasian Economic Union:
Caterpillar Eurasia LLC75, Sadovnicheskaya Emb.
Moscow 115035, Russia