Final Drive Planetary Carrier (In Chassis) - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Guide Stud M20 by 25 cm | 2 |
B | 439-3939 | Link Bracket As | 1 |
Start By:
- Remove the axle.
- Drain the oil from the final drive. Refer to Operation and Maintenance Manual, "Final Drive Oil – Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g00865478 - Remove two bolts (1) and install Tooling (A). Remove remaining bolts (1).
Show/hide table
Illustration 2 g00865575 - Attach Tooling (B) to final drive planetary carrier (2). Attach a suitable lifting device to Tooling (B). The weight of final drive planetary carrier (2) is approximately
86 kg (190 lb) . Remove final drive planetary carrier (2).Show/hide tableIllustration 3 g00865624 - Remove lip-type seal (3).
- Install final drive planetary carrier (2) in the reverse order of removal.
Caterpillar Information System:
988K XE Wheel Loader Declaration of Conformity
631K OEM Power Train Bearing Cage (Drive Shaft) - Assemble
D5R and D6N Track-Type Tractor Engine Supplement Valve Cover - Remove and Install
Repair Procedure For Sealing Air Conditioner On Certain D5, D6, D7, and D8 Track-Type Tractors {7309, 7311, 7316, 7320} Repair Procedure For Sealing Air Conditioner On Certain D5, D6, D7, and D8 Track-Type Tractors {7309, 7311, 7316, 7320}
631K OEM Power Train Bearing Cage (Drive Shaft) - Disassemble
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Variable Pitch Fan System
D5R and D6N Track-Type Tractor Machine Systems Bottom Guard - Remove and Install
C175-16 Locomotive Engine Thermostatic Valve - Inspect
631K OEM Power Train Service and Parking Brake - Assemble
AD55 Underground Articulated Truck Steering System Steering System (Pilot Oil)
Wear Guidelines for Compact Track Loaders {4180} Wear Guidelines for Compact Track Loaders {4180}
C175-16 and C175-20 Locomotive Engines Fuel Lines - Install - High Pressure
988K XE Wheel Loader Cooling System Coolant (ELC) - Change
988K XE Wheel Loader Cooling System Coolant Extender (ELC) - Add
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor (Lift Linkage) - Replace
988K XE Wheel Loader Cooling System Coolant Level - Check
631K OEM Power Train Torque Limiter (Drive Shaft) - Remove and Install - Tractor
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor (Tilt Linkage) - Replace
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Pilot Pressure - Test and Adjust
An Improved Oil Pump Body Assembly Is Used on Certain C27, C32, and 3412 Machine Engines {1304} An Improved Oil Pump Body Assembly Is Used on Certain C27, C32, and 3412 Machine Engines {1304}
New Transmission Oil Cooler Support Brackets Is Now Used on Certain Wheel Tractor - Scraper Engines {1000, 1375} New Transmission Oil Cooler Support Brackets Is Now Used on Certain Wheel Tractor - Scraper Engines {1000, 1375}
Procedure to Replace or Repair the Fuel Filler Neck on Certain 910K and 914K Compact Wheel Loaders {1273} Procedure to Replace or Repair the Fuel Filler Neck on Certain 910K and 914K Compact Wheel Loaders {1273}
D5R and D6N Track-Type Tractor Power Train Recoil Spring - Remove and Install
C280 Marine Engines Diesel Exhaust Fluid Tank