Valve Cover - Remove and Install
- Open the left-hand door assembly.
Show/hide table
Illustration 1 g06093432 Typical Example - Remove bolts (1) and valve cover (2).
Note: There are two different length bolts. Note the position of the bolts for installation purposes.
- Remove the gasket from valve cover (2).
- install valve cover (2) in the reverse order of removal.
Show/hide table
Illustration 2 g03382469 - Tighten bolts (1) in the numerical sequence that is shown in illustration 2. Tighten bolts (1) to a torque
22 N·m (195 lb in) .
Caterpillar Information System:
Repair Procedure For Sealing Air Conditioner On Certain D5, D6, D7, and D8 Track-Type Tractors {7309, 7311, 7316, 7320} Repair Procedure For Sealing Air Conditioner On Certain D5, D6, D7, and D8 Track-Type Tractors {7309, 7311, 7316, 7320}
631K OEM Power Train Bearing Cage (Drive Shaft) - Disassemble
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Variable Pitch Fan System
D5R and D6N Track-Type Tractor Machine Systems Bottom Guard - Remove and Install
C175-16 Locomotive Engine Thermostatic Valve - Inspect
631K OEM Power Train Service and Parking Brake - Assemble
AD55 Underground Articulated Truck Steering System Steering System (Pilot Oil)
Wear Guidelines for Compact Track Loaders {4180} Wear Guidelines for Compact Track Loaders {4180}
C175-16 and C175-20 Locomotive Engines Fuel Lines - Install - High Pressure
988K XE Wheel Loader Lifting and Tying Down the Machine
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Crankshaft
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Camshaft
631K OEM Power Train Bearing Cage (Drive Shaft) - Assemble
988K XE Wheel Loader Declaration of Conformity
D5R and D6N Track-Type Tractor Power Train Final Drive Planetary Carrier (In Chassis) - Remove and Install
988K XE Wheel Loader Cooling System Coolant (ELC) - Change
988K XE Wheel Loader Cooling System Coolant Extender (ELC) - Add
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor (Lift Linkage) - Replace
988K XE Wheel Loader Cooling System Coolant Level - Check
631K OEM Power Train Torque Limiter (Drive Shaft) - Remove and Install - Tractor
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Position Sensor (Tilt Linkage) - Replace
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Pilot Pressure - Test and Adjust
An Improved Oil Pump Body Assembly Is Used on Certain C27, C32, and 3412 Machine Engines {1304} An Improved Oil Pump Body Assembly Is Used on Certain C27, C32, and 3412 Machine Engines {1304}
New Transmission Oil Cooler Support Brackets Is Now Used on Certain Wheel Tractor - Scraper Engines {1000, 1375} New Transmission Oil Cooler Support Brackets Is Now Used on Certain Wheel Tractor - Scraper Engines {1000, 1375}