C175-16 and C175-20 Locomotive Engines Caterpillar

Installation Procedure

Show/hide table

Illustration 1	g06092047

1. Use Tooling (A) and a suitable lifting device to position flywheel housing (24). The weight of flywheel housing (24) is approximately 726 kg (1600 lb).
   Show/hide table

   Illustration 2	g01220583

2. Install bolts (25) that connect the oil pan to flywheel housing (24).
   Show/hide table

   Illustration 3	g06092055

3. Install bolts (26) remove Tooling (A) from flywheel housing (24).
   Show/hide table

   Illustration 4	g06092043

4. Install crankshaft position sensor (21), bolts (20), and connect harness assembly (22).
   Show/hide table

   Illustration 5	g06092035

5. Install cover (19), bolts (17), and connect harness assembly (18).
   Show/hide table

   Illustration 6	g06092030

6. Connect tube assembly (16).
   Show/hide table

   Illustration 7	g06092027

7. Install cam gear (15) and bolts (14).
   Show/hide table

   Illustration 8	g06092002

8. Install cover (13), bolts (12), cover (10), bolts (11), and seals (9).
   Show/hide table

   Illustration 9	g06091852

9. Use a suitable lifting device to position turbo support (1). The weight of turbo support is approximately 191 kg (421 lb).

10. Install bolts (3), bolt (8), and position harness assembly (4).

11. Position line (7), install bolts (5), and hose assembly (6).

12. Connect hose assembly (2).

End By:

1. Install the crankshaft rear seal.

2. Install the aftercooler.

3. Install the starters.

4. Install the turbo chargers.