C175-16 and C175-20 Locomotive Engines Caterpillar

Removal Procedure

1. Turn the battery disconnect switch to the OFF position.

2. Turn the fuel supply valve to the OFF position.
   Show/hide table

   NOTICE
   Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates.

3. Drain the oil from the engine into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
   Show/hide table

   Illustration 1	g06095073

4. Remove bolts (1), bolts (3), and elbow (2).
   Show/hide table

   Illustration 2	g06095259

5. Attach Tooling (C) onto the engine. The weight of the C175-16 engine is approximately 12750 kg (28110 lb). The weight of the C175-20 engine is approximately 14000 kg (30865 lb).
   Show/hide table

   Illustration 3	g06095267

6. Remove bolts (4) and bolts (5).
   Show/hide table

   Illustration 4	g06095290

7. Raise the engine from engine oil pan (6).
   Show/hide table

   Illustration 5	g06095354

8. Position the engine on Tooling (A).
   Show/hide table

   Illustration 6	g06095472

9. Attach Tooling (B) and a suitable lifting device onto engine oil pan (6). The weight of engine oil pan (6) on a C175-16 engine is approximately 591 kg (1303 lb). The weight of engine oil pan (6) on a C175-20 engine is approximately 696 kg (1534 lb). Remove engine oil pan (6).