Cooling System Package (Radiator, Aftercooler, Hydraulic Oil Cooler) - Remove and Install
Start By:
- Remove the hood.
- Remove the front bottom guard.
- Remove clip (1) and the cable strap on hose (2). Loosen the clamps and disconnect hose (2) and hose (3).
- Loosen the clamps and remove hose (4) and hose (5).
Show/hide table
Illustration 2 g06053794 - Loosen the clamps and disconnect hose (6), hose (7), and hose (8).
Show/hide table
Illustration 3 g06053859 - Disconnect hose assembly (9) and hose assembly (10).
Show/hide table
Illustration 4 g06053877 - Remove cable strap (11) and disconnect harness assembly (12).
Show/hide table
Illustration 5 g06054228 - Remove three bolts (13). Repeat for the opposite side.
Show/hide table
Illustration 6 g06054314 - Attach Tooling (A) and a suitable lifting device to cooling system package (14). The weight of cooling system package (14) is approximately
340 kg (750 lb) (14). - Remove cooling system package (14) from the machine.
Show/hide table
Illustration 1 | g06053780 |
- Install cooling system package (14) in the reverse order of removal.
- Tighten the clamp on hose (2) to a torque of
11 ± 1 N·m (97 ± 9 lb in) .
- Tighten the clamp on hose (2) to a torque of
Caterpillar Information System:
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway Manual Valve - Check
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway Switch Status - Check
PL61 Pipelayer Power Train Piston Motor (Hydrostatic) - Assemble
631K OEM Wheeled Tractor Engine Supplement Aftercooler - Remove and Install - Tractor
D6T Track-Type Tractor Systems Electronic Control (Steering System)
631K and 637K Wheel Tractor Scraper Engine Supplement Transmission Oil Cooler - Remove and Install - Scraper
Converting Fuel Injection Pump Lines from Tubes to Steel-Braided Hoses on Certain D3K2, D4K2, and D5K2 Track-Type Tractors with Fireplow Modifications {1251, 1274, 1290} Converting Fuel Injection Pump Lines from Tubes to Steel-Braided Hoses on Certain D3K2, D4K2, and D5K2 Track-Type Tractors with Fireplow Modifications {1251, 1274, 1290}
D6T Track-Type Tractor Systems General Information (Steering System)
631K OEM Wheeled Tractor Engine Supplement Hydraulic Oil Cooler - Remove and Install - Tractor
988K Wheel Loader Systems Accumulator Charging Valve (Brake)
631K OEM Wheeled Tractor Engine Supplement Fan and Piston Motor (Hydraulic Fan) - Remove and Install - Tractor
988K XE Wheel Loader Systems Relief Valve
D6K Track Type Tractor Engine Supplement Refrigerant Compressor - Remove and Install
A New Torque Procedure For DEF Coolant Lines is Now Being Used on Certain M Series Medium Wheel Loader {108H, 108K, 108T, 1091, 7554} A New Torque Procedure For DEF Coolant Lines is Now Being Used on Certain M Series Medium Wheel Loader {108H, 108K, 108T, 1091, 7554}
New Software Is Now Used On Certain D7E Track-Type Tractors {5701, 7490, 7601, 7603, 7610, 7620} New Software Is Now Used On Certain D7E Track-Type Tractors {5701, 7490, 7601, 7603, 7610, 7620}
Cat® Wheel Loaders Meet Performance Requirements of a Spark Arrestor, When Equipped with a Cat C7.1 ACERT™ U.S. EPA Tier 4 Final / EU Stage IV / Japan 2014 (Tier 4 Final) Compliant Emission Solution {0374, 1000, 108D, Cat® Wheel Loaders Meet Performance Requirements of a Spark Arrestor, When Equipped with a Cat C7.1 ACERT™ U.S. EPA Tier 4 Final / EU Stage IV / Japan 2014 (Tier 4 Final) Compliant Emission Solution {0374, 1000, 108D,
PL61 Pipelayer Power Train Final Drive and Sprocket - Disassemble
PL61 Pipelayer Power Train Final Drive and Sprocket - Assemble
D6K2 Track-Type Tractor Engine Air Filter Primary Element - Clean/Replace
D6K2 Track-Type Tractor Engine Air Filter Secondary Element - Replace
D6K2 Track-Type Tractor Engine Air Precleaner - Clean - Version 1
D6K2 Track-Type Tractor Front Idler Position - Check/Adjust
D6K2 Track-Type Tractor Track - Check/Adjust
AD22 Underground Articulated Truck Engine Start Switch