Transmission Oil Cooler - Remove and Install - Scraper
- Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
- Refer to Operation and Maintenance Manual for the correct draining and filling procedure.
Show/hide table
Illustration 1 g02726641 Show/hide table
Illustration 2 g02726644 - Attach a suitable lifting device to transmission oil cooler (1). The weight of transmission oil cooler (1) is approximately
45 kg (100 lb) . Remove tube assemblies (3) and bolt (2). - Disconnect tube assemblies (4), (5), and (6). Remove bolts (7) and transmission oil cooler (1).
Show/hide table
Illustration 3 g03357056 - Note orientation of diverter valve (14) for installation purposes.
Show/hide table
Illustration 4 g02726666 - Remove bolts (8), bonnet (9), bracket (10), and the gasket. Remove bolts (12), bonnet (11), and the gasket from core assembly (13). The weight of core assembly (13) is approximately
26 kg (57 lb) .
- Install transmission oil cooler (1) in the reverse order of removal.
Caterpillar Information System:
Converting Fuel Injection Pump Lines from Tubes to Steel-Braided Hoses on Certain D3K2, D4K2, and D5K2 Track-Type Tractors with Fireplow Modifications {1251, 1274, 1290} Converting Fuel Injection Pump Lines from Tubes to Steel-Braided Hoses on Certain D3K2, D4K2, and D5K2 Track-Type Tractors with Fireplow Modifications {1251, 1274, 1290}
D6T Track-Type Tractor Systems General Information (Steering System)
631K OEM Wheeled Tractor Engine Supplement Hydraulic Oil Cooler - Remove and Install - Tractor
988K Wheel Loader Systems Accumulator Charging Valve (Brake)
631K OEM Wheeled Tractor Engine Supplement Fan and Piston Motor (Hydraulic Fan) - Remove and Install - Tractor
988K XE Wheel Loader Systems Relief Valve
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Fuel Lines
AD22 Underground Articulated Truck Maintenance Interval Schedule
AD22 Underground Articulated Truck Engine Lockout Switch
AD22 Underground Articulated Truck Belts - Inspect/Adjust/Replace
PL61 Pipelayer Power Train Axle - Remove and Install
AD22 Underground Articulated Truck Battery Disconnect Switch
D6T Track-Type Tractor Systems Electronic Control (Steering System)
631K OEM Wheeled Tractor Engine Supplement Aftercooler - Remove and Install - Tractor
PL61 Pipelayer Power Train Piston Motor (Hydrostatic) - Assemble
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway Switch Status - Check
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway Manual Valve - Check
D6K Track Type Tractor Engine Supplement Cooling System Package (Radiator, Aftercooler, Hydraulic Oil Cooler) - Remove and Install
D6K Track Type Tractor Engine Supplement Refrigerant Compressor - Remove and Install
A New Torque Procedure For DEF Coolant Lines is Now Being Used on Certain M Series Medium Wheel Loader {108H, 108K, 108T, 1091, 7554} A New Torque Procedure For DEF Coolant Lines is Now Being Used on Certain M Series Medium Wheel Loader {108H, 108K, 108T, 1091, 7554}
New Software Is Now Used On Certain D7E Track-Type Tractors {5701, 7490, 7601, 7603, 7610, 7620} New Software Is Now Used On Certain D7E Track-Type Tractors {5701, 7490, 7601, 7603, 7610, 7620}
Cat® Wheel Loaders Meet Performance Requirements of a Spark Arrestor, When Equipped with a Cat C7.1 ACERT™ U.S. EPA Tier 4 Final / EU Stage IV / Japan 2014 (Tier 4 Final) Compliant Emission Solution {0374, 1000, 108D, Cat® Wheel Loaders Meet Performance Requirements of a Spark Arrestor, When Equipped with a Cat C7.1 ACERT™ U.S. EPA Tier 4 Final / EU Stage IV / Japan 2014 (Tier 4 Final) Compliant Emission Solution {0374, 1000, 108D,
PL61 Pipelayer Power Train Final Drive and Sprocket - Disassemble
PL61 Pipelayer Power Train Final Drive and Sprocket - Assemble