C9 Petroleum Engines Caterpillar


Plate Locations and Film Locations

Usage:

C9 P9L


Ilustrasi 1g01392497
Tampak samping kiri dari C9 Petroleum Engine
Pelat nomor seri terletak di samping kiri blok silinder. Modul kontrol engine akan menghalangi pandangan ke pelat nomor seri.


Ilustrasi 2g00764267
Pelat nomor seri

Informasi berikut tercetak di pelat nomor seri: nomor seri engine, model engine dan nomor pengaturan.



Ilustrasi 3g01392501
Tampak atas dari C9 Petroleum Engine
Pelat informasi engine terletak mengarah ke bagian belakang penutup katup. Pelat informasi engine bisa dibaca dari samping kanan engine.


Ilustrasi 4g01347963
Pelat informasi engine

Informasi berikut ada di pelat informasi: nomor seri engine, model engine, nomor pengaturan engine, ketinggian maksimal engine yang perlu untuk mencapai daya tetapan, daya kuda, idle tinggi, rpm beban penuh, setelan bahan bakar dan informasi lainnya

Sertifikasi Lokasi Berbahaya

Engine ini dapat digunakan sebagai komponen dalam ATEX Directive (94/9/EC) Group II, lingkungan 3G dengan Kelompok Gas IIA, Kelas Temperatur T3 (temperatur permukaan maksimum 200 Derajat C). Pelat sertifikasi terletak di samping kiri engine.



Ilustrasi 5g01924633
Contoh khusus

Caterpillar Information System:

Air/Fuel Ratio Control View Screens (Display)
3512C Industrial Engine Front Drive Housing - Remove and Install
C15, C18 and C32 Marine Engine Service Meter Runs Constantly{1426, 4462} C15, C18 and C32 Marine Engine Service Meter Runs Constantly{1426, 4462}
Air/Fuel Ratio Control Reset to Start
0R-9393 Cylinder Pack Gp Piston Ring Position on Certain C16, 3406E, and 3456 Engines{1215, 1225} 0R-9393 Cylinder Pack Gp Piston Ring Position on Certain C16, 3406E, and 3456 Engines{1215, 1225}
584 and 584HD Forwarders Slope Operation
Air/Fuel Ratio Control Home Screen
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100} Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Air/Fuel Ratio Control Control Method
Air/Fuel Ratio Control System Setup Procedure
Air/Fuel Ratio Control System Overview
3408C and 3412C Marine Engines Engine Oil Lines
Cleaning the Compression Brake{1129} Cleaning the Compression Brake{1129}
C9 Petroleum Engines Diagnostic Flash Code Retrieval
C7 Marine Engine Piston Cooling Jet
C7 Marine Engine Piston Cooling Jet
C7 Marine Engine Piston Cooling Jet
C7 Marine Engine Piston Cooling Jet
Inspection and Salvage of Rear Wheel Spindles for All Off-Highway Trucks {4201, 4205} Inspection and Salvage of Rear Wheel Spindles for All Off-Highway Trucks {4201, 4205}
CX28 On-Highway Transmission Transmission Charge Pump and Support - Install
3512C Industrial Engine Vibration Damper - Remove and Install
CX28 On-Highway Transmission Transmission Charge Pump and Support - Disassemble
CX28 On-Highway Transmission Transmission Charge Pump and Support - Assemble
Air/Fuel Ratio Control Control Target Setpoints
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.