Conversions from Standby Gensets to Prime and Continuous Genset Applications Are Now Available {1052, 1053, 1071, 1205, 1901, 1902, 7620}
- Generator Set:
- C32 GEN SET (S/N: SXC300-436,438-441,443-469,472-472,482-591,595-606,608-611,613-614,616-621,627-631,637-639,643-658,660-661,665-676,678-682,684-704,706-738,740-775,778-790,793-793,796-796,798-798)
- Petroleum Engine:
- C32 PETROLEUM (S/N: SMP100-139,142-176,178-187)
ReferenceRefer to Special Instruction, REHS3793, "Converting Standby Gensets to Prime and Continuous Genset Applications".
The conversions are only for the engines that are listed above. The conversions include changes in software and hardware. The following changes are included:
- Turbochargers
- Pulleys
- Belts
- Studs
- The brackets for the air lines from the turbocharger outlet to the air to air aftercooler
- Software
Caterpillar Information System:
2007/06/18 Managing Engine Oil Service Levels {1348}
C13 and C15 On-Highway Engines Turbocharger - Inspect
C7 and C9 Petroleum Engines Engine Cranks but Does Not Start
C7 and C9 Petroleum Engines Fuel Consumption Is Excessive
2007/06/18 Prolonging the Life of the Fuel Injectors {1251, 1254, 1261, 1280, 1290, 1713}
C7 and C9 Petroleum Engines ECM Does Not Communicate with Other Modules
C7 and C9 Petroleum Engines Battery Problem
3512C Engine for Caterpillar Built Machines Crankcase Breather - Remove and Install
C7 and C9 Petroleum Engines Electrical Connectors - Inspect
C7 and C9 Petroleum Engines Injector Trim File - Install
C7 and C9 Petroleum Engines Intake Manifold Air Temperature Is High
3512C Industrial Engine Engine Oil Pan - Install
3408C and 3412C Marine Engines Engine Oil Lines
3408C and 3412C Marine Engines Engine Oil Lines
Air/Fuel Ratio Control System Overview
Air/Fuel Ratio Control System Setup Procedure
Air/Fuel Ratio Control Control Method
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100} Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Air/Fuel Ratio Control Home Screen
584 and 584HD Forwarders Slope Operation
0R-9393 Cylinder Pack Gp Piston Ring Position on Certain C16, 3406E, and 3456 Engines{1215, 1225} 0R-9393 Cylinder Pack Gp Piston Ring Position on Certain C16, 3406E, and 3456 Engines{1215, 1225}
Air/Fuel Ratio Control Reset to Start
C15, C18 and C32 Marine Engine Service Meter Runs Constantly{1426, 4462} C15, C18 and C32 Marine Engine Service Meter Runs Constantly{1426, 4462}
3512C Industrial Engine Front Drive Housing - Remove and Install