1987/03/09 Caterpillar


Improved Injector Clamp Eliminates Interference With Bridge {1290}

Usage:


3508, 3512 And 3516 Engines

Description of Change: The inside diameter of the 1N4910 Injector Clamp has been reduced by 0.3 mm (.0118") to provide a closer fit on the injector. With the use of the new injectors (7C341, 7C345 and 7C2239 Injectors), the former clamp can contact the bridge if not assembled carefully. The improved clamp eliminates the need to loosen and realign the clamp with the bridge during assembly to prevent interference. The former clamp can be used with the new injectors, with careful assembly, to avoid contact between the bridge and clamp.

Adaptable To: The improved 1N4910 Injector Clamp is adaptable to all earlier engines, regardless of which injector is used. The part number did not change.

Caterpillar Information System:

1987/03/09 New Air Cleaner Mounting Brackets Used For Heavy-Duty Air Cleaner Groups {1051}
1987/03/09 Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/02 New Fan Drives Used{1358}
1987/03/02 New 8T5261 Bushing Installer And Remover Adapter Tool Available{0600}
1987/03/02 Water Separator Available{1263}
1987/03/02 Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02 Tools Available To Install Plastic Tie Straps{0709,0738}
1987/03/02 Bolt-On Roller Groups Available For Competitive Hydraulic Excavators{4150}
1987/02/23 Water Temperature Regulators Standardized{1355}
1987/02/23 Two Front Timing Gear Housings Available{1162,1150}
1987/02/23 Stronger Timing Gear Housing; Additional Stud Used At Top Of Housing{1151,1201}
1987/02/16 Grommets Added To Dampen Vibration{1307}
1987/03/16 Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16 Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16 New Voltage Regulators Used On SR-4 Generators{4450}
1987/03/16 Remanufactured Cylinder Heads For 3406 Engines{1100}
1987/03/23 Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit{1395,0786}
1987/03/23 Cooling System Conditioner{1395,1350}
1987/03/23 5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23 Dispenser Available For Shop Towels{0600}
1987/03/23 Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23 Some Components Of The Transmission Mounting Group For Allison AT540 And AT545 Transmissions Are No Longer Serviced By Caterpillar{3279,1013,3009}
1987/03/23 Pleasure Craft Cruise Kits Available{1000}
1987/03/23 Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.