2015/09/25 Caterpillar


New Power Train Software Gp is Now Available for 966K XE Machines {7620}

Usage:

966K XE NGX
Wheel Loader:
966KSeries XE (S/N: NGX1-UP)
Service Magazine, SEPD2054, 15 September 2015, "New Power Train Software Gp is Now Available for 966K XE Machines". Disregard the information in the article listed above. Refer to the information in the following article.

Description of Change: New Power Train Software Gp is now available for 966K XE Machines. The new software contains following improvements:

  • Improved starter command.

  • Resolved an issue with the Transmission Torque Calibration not to be performed successfully.

Adaptable To: The new software part number is listed in Table 1.

Table 1
New Power Train Software Gp    
New Part Number     Description     Former Part Number    
481-0471     Power Train Software Gp     479-0054
or 469-6245    
It is required to download and save the Transmission ECM replacement file before flashing this software over 469-6245 Power Train Software Gp or 479-0054 Power Train Software Gp .

It is required to load the saved ECM replacement file into the Transmission ECM after the software flash has been completed.

Caterpillar Information System:

Installing Optional Migration Kits on C9.3 through C15 ACERT Tier 4 Interim Machine Engines {1000, 1261, 1380, 775E} Installing Optional Migration Kits on C9.3 through C15 ACERT Tier 4 Interim Machine Engines {1000, 1261, 1380, 775E}
D6N Track-Type Tractor Systems Final Drive
3516E Engines for 994K Wheel Loaders Finding the Top Center Position for the No. 1 Piston
D6N Track-Type Tractor Systems Brake and Planetary
D6N Track-Type Tractor Systems Differential Drive and Brake Group
3516E Engines for 994K Wheel Loaders Cooling System Operation
320 GC, 320 and 323 Excavator Machine Systems Specifications Ether Starting Aid
340F Excavator Machine Systems Air Conditioner and Mounting
Identifying A Linkage Over Dump Condition On An ISO Coupler 924K, 930K, and 938K Small Wheel Loaders{6001, 6129} Identifying A Linkage Over Dump Condition On An ISO Coupler 924K, 930K, and 938K Small Wheel Loaders{6001, 6129}
992K Wheel Loader Stairway (Powered) Operation - If Equipped
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loader Machine Systems Steering Cylinder - Remove and Install
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loader Machine Systems Steering Wheel - Remove and Install
963K Track Type Loader Engine Supplement Alternator - Remove and Install
D6N Track-Type Tractor Systems Torque Converter Lockup Clutch Pressure - Test
Troubleshooting the C3.3B and C3.8 Engine Electronic Control Modules (ECM) Prior to Replacing the Engine ECM {1450, 1901} Troubleshooting the C3.3B and C3.8 Engine Electronic Control Modules (ECM) Prior to Replacing the Engine ECM {1450, 1901}
963K Track Type Loader Engine Supplement Battery - Remove and Install
2015/09/03 Correct Valve Rocker Arm Usage on C27 and C32 Machine Engines {1123}
2015/09/04 Correct Valve Rocker Arm Usage on C27 and C32 Engines {1123}
239D, 249D, 259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Stee MID 039 - CID 5001 - FMI 03
239D, 249D, 259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Stee MID 039 - CID 5001 - FMI 04
239D, 249D, 259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Stee MID 039 - CID 5001 - FMI 08
239D, 249D, 259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Stee MID 039 - CID 5002 - FMI 03
239D, 249D, 259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Stee MID 039 - CID 5002 - FMI 04
239D, 249D, 259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Stee MID 039 - CID 5002 - FMI 08
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.