D6N Track-Type Tractor Systems Caterpillar


Brake and Planetary

Usage:

D6N GB6


图 1g02794146

表 1
技术规格,用于 448-5374 制动器和行星齿轮总成 
项目  数量  零件  技术规格说明 
12  0S-1585 螺栓  拧紧至扭矩为 135 ± 20 N·m (100 ± 15 lb ft)。 
四片新的摩擦片和三片新盘的厚度为 28.34 ± 0.96 mm (1.116 ± 0.038 inch): 
4 6Y-9373 摩擦盘  厚度 4.70 ± 0.18 mm (0.185 ± 0.007 inch)。 
3 7T-6994 盘  厚度 3.175 ± 0.075 mm (0.1250 ± 0.0030 inch)。 
244-2310 行星齿轮  内径为 51.948 ± 0.010 mm (2.0452 ± 0.0004 inch)。 
7T-8136 行星齿轮轴  直径为 42.395 ± 0.006 mm (1.6691 ± 0.0002 inch)。 
3T-5807 挡油环  将 Loctite 高柔性 GM 涂抹在挡油环法兰上与托架接触的区域。 

Caterpillar Information System:

D6N Track-Type Tractor Systems Differential Drive and Brake Group
3516E Engines for 994K Wheel Loaders Cooling System Operation
320 GC, 320 and 323 Excavator Machine Systems Specifications Ether Starting Aid
340F Excavator Machine Systems Air Conditioner and Mounting
Identifying A Linkage Over Dump Condition On An ISO Coupler 924K, 930K, and 938K Small Wheel Loaders{6001, 6129} Identifying A Linkage Over Dump Condition On An ISO Coupler 924K, 930K, and 938K Small Wheel Loaders{6001, 6129}
992K Wheel Loader Stairway (Powered) Operation - If Equipped
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loader Machine Systems Steering Cylinder - Remove and Install
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loader Machine Systems Steering Wheel - Remove and Install
D7E Track-Type Tractor Power Train Systems Solenoid Valve - Test
992K Wheel Loader Electric Drive Pump (Powered Stairway) Oil Level - Check - If Equipped
992K Wheel Loader Platform (Powered Stairway) - Lubricate - If Equipped
2015/09/25 A New NRS Cooler Assembly Is Used for Certain Tier 4 C15 and C18 Machine Engines {108C}
3516E Engines for 994K Wheel Loaders Finding the Top Center Position for the No. 1 Piston
D6N Track-Type Tractor Systems Final Drive
Installing Optional Migration Kits on C9.3 through C15 ACERT Tier 4 Interim Machine Engines {1000, 1261, 1380, 775E} Installing Optional Migration Kits on C9.3 through C15 ACERT Tier 4 Interim Machine Engines {1000, 1261, 1380, 775E}
2015/09/25 New Power Train Software Gp is Now Available for 966K XE Machines {7620}
963K Track Type Loader Engine Supplement Alternator - Remove and Install
D6N Track-Type Tractor Systems Torque Converter Lockup Clutch Pressure - Test
Troubleshooting the C3.3B and C3.8 Engine Electronic Control Modules (ECM) Prior to Replacing the Engine ECM {1450, 1901} Troubleshooting the C3.3B and C3.8 Engine Electronic Control Modules (ECM) Prior to Replacing the Engine ECM {1450, 1901}
963K Track Type Loader Engine Supplement Battery - Remove and Install
2015/09/03 Correct Valve Rocker Arm Usage on C27 and C32 Machine Engines {1123}
2015/09/04 Correct Valve Rocker Arm Usage on C27 and C32 Engines {1123}
239D, 249D, 259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Stee MID 039 - CID 5001 - FMI 03
239D, 249D, 259D, 279D, 289D, 299D, 299D XHP, 299D2 and 299D2 XHP Compact Track Loaders, 257D, 277D, 287D, 297D, 297D XHP, 297D2 and 297D2 XHP Multi Terrain Loaders and 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XHP, 272D2 and 272D2 XHP Skid Stee MID 039 - CID 5001 - FMI 04
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.