994H Wheel Loader Caterpillar


Electric Drive Pump (Powered Stairway) Oil Level - Check - If Equipped

Usage:

994H DWC



Illustration 1g03883564

(1) Powered stairway electric drive pump oil filler cap

(2) Oil level sight gauge

The oil level sight gauge for the powered stairway electric drive pump is located on the front of the powered stairway platform. The sight gauge is visible through an inspection slot in the protective cover that surrounds the sight gauge.

  1. Check the oil level of the electric drive pump by viewing oil level sight gauge (2) through the inspection slot.

  1. Maintain the oil volume at a level that is visible within the range of the inspection slot. The top of the inspection slot is the maximum oil level and the bottom of the inspection slot is the minimum oil level.

    Note: Do not operate the powered stairway when the oil volume is below the minimum oil level.

  1. If necessary, remove filler cap (1) and add oil. Refer to Operation and Maintenance Manual, "Lubricant Viscosities" for information concerning the correct type of oil to use.

Caterpillar Information System:

D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems Sensor Signal (PWM) - Test
336F and 340F Excavators Machine System Specifications Counterweight Mounting
336D2 and 340D2 Excavators Machine System Solenoid Valve
336F and 340F Excavators Machine System Specifications Check Valve (Hydraulic Oil Cooler Bypass)
312D2 and 313D2 Excavators Maintenance Interval Schedule
D6N Track-Type Tractor Systems Transmission Lubrication Oil Pressure - Test
Instructions for Updating the Firmware on a MS9x2 GNSS Receivers Using a CB460 Cat Grade Control Display {7010, 7220, 7620} Instructions for Updating the Firmware on a MS9x2 GNSS Receivers Using a CB460 Cat Grade Control Display {7010, 7220, 7620}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737} Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
D6N Track-Type Tractor Engine Supplement Water Temperature Regulator - Remove and Install
994H Wheel Loader Stairway (Powered) Operation - If Equipped
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Starting System
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Charging System
953K Track-Type Loader Power Train Track Drive Motor - Remove and Install
994H Wheel Loader Electric Drive Pump (Powered Stairway) Oil - Change - If Equipped
D6N Track-Type Tractor Engine Supplement Fumes Disposal Filter - Remove and Install
D6N Track-Type Tractor Engine Supplement Water Pump (Engine) - Remove and Install
C1.7 and C2.2 Industrial Engines Cold Weather Starting
2015/09/01 Updated Transmission Software Is Available for Certain 986H Machines {3168, 7490, 7610, 7620}
D7E Track-Type Tractor Power Train Systems Sensor Signal (PWM) - Test
336F and 340F Excavators Machine System Specifications Upper Frame
Updated Transmission Software Is Available for Certain 986H Machines{3168, 7490, 7610, 7620} Updated Transmission Software Is Available for Certain 986H Machines{3168, 7490, 7610, 7620}
D6T Track-Type Tractor Supplement Regulatory Information (Japan)
D6N Track-Type Tractor Engine Supplement Hydraulic Oil Cooler - Remove and Install
D7E Track-Type Tractor Maintenance Interval Schedule
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.