C4.4 (Mech) Industrial Engine Caterpillar


V-Belt - Test

Usage:

C4.4 2L2

表 1
所需工具    
工具     零件号     零件描述     数量    
A     144-0235     皮带张力计     1    

表 2
皮带张紧度表    
皮带尺寸     皮带宽度     仪表读数    
初始皮带张力 (1) 旧皮带张力 (2)    
1/2    
13.89 mm (0.547 in)    

535 N (120 lb)    

355 N80 ( lb)    
测量皮带张力。    
( 1 ) 初始皮带张力是指新皮带。
( 2 ) 旧皮带张力是指已在额定转速下工作不低于 30 分钟的皮带。

将工具 (A) 安装在皮带最大自由长度的中心位置,并检查两条皮带的张力。 检查并调整最紧皮带的张力。 如需调整皮带张力,请参阅拆解和组装, "交流发电机 - 安装"。

多 V 形皮带


注意

确保在进行任何维护和修理工作之前关闭发动机。


为使发动机性能最大化,检查多 V 形皮带 (1) 有无磨损和裂纹。 如果多 V 形皮带磨损或损坏,更换皮带。

  • 如果多 V 形传动带 (1) 每 25.4000 mm (1 inch) 的长度上有超过四条裂纹,则必须更换传动带。

  • 检查多 V 形皮带有无裂纹、裂口、磨光、油脂和裂缝。




图 1g01216014

典型示例

要更换多 V 形皮带,请参阅拆解和装配, "交流发电机皮带 - 拆卸和安装"。

如有必要,更换皮带张紧器。 请参阅拆解和组装, "交流发电机皮带 - 拆卸和安装"。

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.