A New Steering Knob Assembly Is Now Used on Certain 924K, 930K, and 938K Wheel Loaders {4310, 4338, 4343}
- Wheel Loader:
- 924K (S/N: ENC1-UP; HJF1-UP; PWR1-UP)
- 930K (S/N: DYB1-UP; EYE1-UP; RHN1-UP)
- 938K (S/N: SWL1-UP; XXT1-UP; HFW1-UP)
Description of Change: A new steering knob assembly is now used on the machines listed above. The new steering knob assembly design has a wave washer which allows the knob to spin without causing noise issues.
Adaptable To:
Show/hide table
 | |
| Illustration 1 | g03676570 |
Show/hide table
 | |
| Illustration 2 | g03676569 |
View A | |
New 419-0824 Steering Knob As (1) replaces the former 8R-2918 Knob As in the steering control group.
The new 419-0824 Steering Knob As is adaptable to earlier machines and effective in production with machines that are listed in Table 1.
Show/hide table
| Sales Model | Adaptable to Machines | Effective in Production with Machines |
| 924K | S/N:HJF1-349 | S/N:HJF350-UP |
| S/N:ENC1-536 | S/N:ENC537-UP | |
| S/N:PWR1-2769 | S/N:PWR2770-UP | |
| 930K | S/N:EYE1-374 | S/N:EYE375-UP |
| S/N:DYB1-204 | S/N:DYB205-UP | |
| S/N:RHN1-2885 | S/N:RHN2886-UP | |
| 938K | S/N:SWL1-2522 | S/N:SWL2523-UP |
| S/N:HFW1-420 | S/N:HFW421-UP | |
| S/N:XXT1-517 | S/N:XXT518-UP |
Caterpillar Information System:
990K Wheel Loader Systems Bucket - Rock
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Limit Switch (Stop Light) - Adjust
990K Wheel Loader Systems Bucket - Rock
D8T Track-Type Tractor Towing the Machine
990K Wheel Loader Systems Piston Pump (Steering)
C4.4 Engines for Caterpillar Built Machines Fuel Injection Pump Gear - Remove
390F Excavator Safety Messages
990K Wheel Loader Systems Tilt Cylinder
C15 and C18 Engines for Caterpillar Built Machines Turbocharger Oil Lines
AD30 Underground Articulated Truck Machine Systems Tailgate Retaining Pin - Remove and Install
AD30 Underground Articulated Truck Engine Supplement Radiator Tank (Header) - Install
AD30 Underground Articulated Truck Engine Supplement Radiator Tank (Header) - Remove
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Limit Switch (Throttle Lock Deactivation) (Electronic Technician) - Adjust
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Power Train Torque Converter - Assemble
2014/05/30 AccuGrade ® Monitor Harness Assembly Is Now Part of SITECH Package for Certain D3K2, D4K2, and D5K2 Track-Type Tractors {1408, 7220}
854K Wheel Dozer Electrohydraulic System Calibration Error Codes
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems General Information (Fan Hydraulic System)
990K Wheel Loader Machine Systems Piston Pump Cutoff Pressure (Hydraulic Fan) - Test and Adjust
D6N Track-Type Tractor Leaving the Machine
990K Wheel Loader Machine Systems Ride Control Activation Speed (Electronic Technician) - Adjust
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Brake System Air - Purge
C3.3B and C3.8 Engines for Caterpillar Built Machines Solenoid Valve - Test - Suction Control Valve
525D, 535D, 545D and 555D Wheel Skidders Power Train Torque Converter to Transmission - Connect
990K Wheel Loader Machine Systems Implement Cycle Time - Check